18
Super Hub Settings
The Super Hub Settings area will allow
you to change the following settings:
Super Hub Access
Allows you to change the default
login password for your Super Hub
settings area.
If you forget this password, you’ll need
to re-set your Super Hub to default
settings (see page 21).
Remote Access
Allows you to enable remote access to
your Super Hub.
Our support teams may request you do
this to help us remotely access/support
you Super Hub, for example. We highly
recommend that you don’t enable this
option unless specifically requested by
a member of the Virgin Media support
team. Please remember to disable it
once support has been given.
Super Hub Version
Allows you to view the Software and
Hardware versions of the Super Hub.
This can help our support teams
diagnose problems you may be
experiencing.
Restore Factory Defaults
Allows you to restore your Super Hub
settings to their ‘default’ state (you
can find this on the label on the rear of
your Super Hub).
Device Connection Status
The Device Connection Status area will
provide information on your Super Hub
and any wired or wireless devices
connected to it.
Advanced Settings
The Advanced Settings area will
provide access to further settings for
your Super Hub. Note that this area is
designed for advanced users only.
113775_VM_Super Hub_MainGuide_AW02.indd 18 29/10/2010 10:50
To Next Page
Loading...
Need help?
General
