To Next PageTo Next Page
Need help?Do you have a question about the Viron P280 eVo and is the answer not in the manual?
General| Model | P280 eVo |
|---|---|
| Voltage | 220-240V |
| Frequency | 50/60 Hz |
| Inlet/Outlet Size | 50mm |
| Type | Variable Speed |
| Energy Efficiency | 8 Star |
| Max Head | 18m |
Critical safety instructions regarding product use, operation, and installation according to standards.
Describes the Viron EVO Pool Pump as a variable-speed DC motor pump for reduced costs and emissions.
Lists the main characteristics and benefits of the Viron EVO pump, including motor, impeller, and design.
Provides the physical measurements and diagram for the Viron EVO pump.
Details requirements for pump placement, stability, accessibility, cooling, and power source proximity.
Specifies pipe size, unions, isolation valves, suction lines, and water temperature limits.
Mandates isolation transformer or RCD for pump power supply to ensure safety.
Warns about potential issues with some chlorinators affecting pump reset and suggests solutions.
Step-by-step guide for priming the pump, checking flow, and troubleshooting initial startup issues.
Explains speed settings (Low, Medium, High) and their recommended uses for operation and energy saving.
Provides guidelines on water turnover, chlorinator adjustment, and selecting speeds for filtration and cleaning.
Lists specific functions like vacuuming, spa jets, and general filtration with corresponding speed recommendations.
Details speed recommendations for P600 eVo for functions like backwashing, cleaning, and general filtration.
Offers advice on optimizing speed for pool cleaning, energy saving, and dealing with cloudy water.
Describes the purpose and operation of each button on the Viron P280/P300 eVo control panel.
Explains how the pump remembers and saves selected speeds, including adjustment and saving procedures.
Details how to lock/unlock buttons and reset speeds to factory defaults.
Highlights features like built-in time clock, programmable timers, speed display, and external control compatibility.
Explains the pump's startup sequence, auto-priming, and the meaning of Fault LED states and conditions.
Guides on using the built-in timer with compatible AstralPool or RolaChem units.
Instructions for setting the current time and configuring independent pump operation.
Details on changing speed settings and configuring filtration timer periods for the pump.
Instructions for using the priming program to circulate water at higher flow rates.
How to connect and configure the P600 pump with external AstralPool compliant controls.
Lists and explains common fault codes displayed on the P600 pump's screen.
Explains how to connect a data cable for remote control of speed and operating times.
Outlines the standalone functions of the Viron P600 eVo pump for remote control and timer settings.
Provides examples of speed settings for various functions like vacuuming, spa jets, and cleaning.
Guidance on operating the pump with suction cleaners, including priming and speed adjustments.
Explains how to connect the pump to gas heaters and ensure sufficient water pressure.
Describes pump behavior when connected to Viron Heaters via RJ12 and Viron Connect.
Outlines periodic checks for the hair and lint basket, O-rings, surroundings, and pump leaks.
Specifies actions to take for detected issues, including cleaning, greasing, or calling a technician.
Outlines the warranty period, coverage, and exclusions for the Viron eVo pumps.
Details the procedure for making a warranty claim, including required documentation and contact information.
Specifies conditions and situations where the warranty will not apply, such as misuse or improper installation.
States the limits of AstralPool's liability and conditions for warranty validity, including commercial installations.
Clarifies AstralPool's discretion in repairs, liability for damages, and commercial installation limitations.
Provides a section for users to record essential equipment details for future reference.
