To Next PageTo Next Page
Need help?Do you have a question about the Viron P600 eVo and is the answer not in the manual?
General| Brand | Viron |
|---|---|
| Model | P600 eVo |
| Category | Swimming Pool Pump |
| Language | English |
Crucial safety warnings regarding product use, installation, and potential hazards.
Overview of Viron EVO pump models, including features, speeds, and approximate flow rates.
Provides dimensional drawings and measurements for the Viron EVO pump.
Guidance on selecting optimal location, base stability, accessibility, and ventilation for the pump.
Details pipework, unions, valves, electrical safety, and water temperature limits.
Warns about potential Viron Pump reset issues with certain chlorinators.
Step-by-step guide on priming the pump and troubleshooting initial water flow issues.
Explains speed settings, automatic start-up, and recommended daily operation for efficiency.
Important safety note regarding supervision of children and vulnerable persons.
General principles and examples for selecting pump speeds for various pool operations.
Practical tips for optimizing speed settings, achieving skimming, and addressing pool clarity issues.
Emphasizes checking water parameters before adjusting pump speed settings.
Details the programmable time clock for setting up to four timer periods daily.
Covers RPM display, speed adjustment, and integration with external time clocks and remotes.
Details adjustable start-up speed and time duration for priming, from 2 to 120 minutes.
How to use inbuilt timers with AstralPool Chlorinators or RolaChem dosing units.
Details factory default settings and instructions for setting the current time.
Configuring standalone operation and adjusting pump speed settings.
Steps for setting up multiple timer periods with specific start/stop times and speeds.
Guidance on deactivating inbuilt timers when using non-compliant chlorinators.
How to use the PRIMING program for higher flow rates during daily filtration.
Configuring pump for operation with AstralPool compliant external controls.
Lists and explains fault codes displayed on the Viron EVO pump screen.
Details the data cable connector and its compatibility with AstralPool accessories.
Lists standalone features like timer periods, speed settings, and priming duration.
Details setup for Viron EVO pumps with VX Timer models or Viron Salt Chlorinators.
Explains setup for Viron EVO pumps with Viron Connect and VX S chlorinators.
Provides specific speed selection examples for the Viron P600 EVO pump in various scenarios.
Instructions and tips for operating the pump with suction pool cleaners.
Explains how to use the pump with AstralPool gas heaters and pressure switches.
Details pump response based on heater status when connected via RJ12 or Viron Connect.
Provides a schedule for weekly and three-monthly maintenance checks and actions.
Covers three-monthly checks for leaks and general care, emphasizing importance.
Visual representation of the control logic and flow for the Viron EVO pump.
Outlines what the warranty covers, including defects in materials and workmanship.
Step-by-step guide on how to make a warranty claim for the product.
Requirements for making the product available for inspection and testing for warranty claims.
Lists conditions and situations where the warranty does not apply.
Details the limited warranty period for commercial installations.
Outlines limitations of the warranty, express warranties, and transferability.
States AstralPool's right to repair or replace defective components at their discretion.
Limits AstralPool's liability and specifies warranty limits for commercial installations.
Emphasizes the necessity of retaining proof of purchase for all warranty claims.
