EN
Virtufit Premium Trampoline with Safety Net
14
IMORTANT! Position the fiberglass rods.
Insert the fiberglass rod W into the passage sewn at the top of the enclosure net (M) above the zipper
entrance. Insert another fiberglass rod W to the opposite side of the zipper entrance. Please refer to
the above image to correctly fit the fiberglass rods and plastic caps to the net.
• Slide the fiberglass rods into the passage sewn at the top of the enclosure net (M). Repeat this until
all the fiberglass rods are fully inserted with Pole caps (U). One person will be required to thread the
fiberglass rods through the passage at the top of the net, another person will be required to gradually
bend the rods around the passage to form a circle.
NOTE! The quick snap click on the pole tube need to face toward the center of fiberglass rod circle.
ASSEMBLY INSTRUCTIONS
STEP 6
�
�
�
�
�
�
�
�
�
�
To Next Page
Loading...