FUNCTIONS FUNCTION EXPLAINING
1. SCAN
When in SCAN position, the meter will rotate through the following functions:
time, count, total count, calorie, count/min and (if have)pulse. Each display will be
hold for 6 seconds.
2. TIME Count the rowing time from exercise start to end.
3. COUNT Count the rowing strokes from start to end.
4. TOTAL COUNT
Count the total rowing strokes from start to end.
5. CALORIES Count the total calories from rowing start to end.
6. COUNT / MIN Display current rowing strokes per minute, or the frequency per minute.
7. AUTO ON/OFF &
AUTO START/STOP
Without any signal for 4 minutes, the power will turn o automatically. When the
stroke is in motion or pressing the button, the monitor is in action.
CONTROL PANEL
FUNCTIONS
To Next Page
Loading...