VISA IT-9300 User Manual

1
OPERATING INSTRUCTIONS
FOR PREPROGRAMMED REMOTE
CONTROLS BY BRAND
IT-9300
BRANDS OF THE FINLUX - ITT/NOKIA/SCHAUB LORENZ -
LUXOR - OCEANIC - SALORA GROUP
DESCRIPTION
1. LED indicator.
2. Access to “secondary functions”.
3. Access to Teletext functions
(only on some models).
4. Switch key to access additional
memory for copying functions
by the learning procedure.
5. Main functions and code entry keys.
6. TV: On/Off or access to the
automatic Device-Code search.
7. VCR: Play or access to the
automatic Device-Code search.
8. Internal RESET key
(to be used only in the specified cases).
9. Key to initialize programming,
search or code visualising
procedures.
Fig. 1
RAPID SET-UP
HOW TO MAKE YOUR REMOTE CONTROL FUNCTION IMMEDIATELY
OPEN THE BATTERY COVER AND INSERT 2 NEW ALKALINE BATTERIES, TYPE AAA/LR03 1,5V AND
CLOSE THE BATTERY COVER.
• SWITCH THE TELEVISION SET ON.
• OPEN THE FRONT COVER OF THE REMOTE CONTROL, PRESS AND RELEASE THE «CODE» KEY AND ENTER
• POINT THE REMOTE CONTROL TOWARDS THE TV SET.
• PRESS AND KEEP PRESSED THE ON/OFF KEY.
• RELEASE IMMEDIATELY THE ON/OFF KEY ONCE THE TV SWITCHES OFF.
•
CHECK THAT THE REMOTE CONTROL OPERATES THE MAIN FUNCTIONS.
• IN THIS CASE
• THE UNIT IS READY.
• OTHERWISE REPEAT AGAIN PROCEDURE.
TO KNOW MORE…
TO MAKE THE BEST USE OF YOUR NEW REMOTE CONTROL WE RECOMMEND THAT YOU READ IN FULL AND
RETAIN THESE INSTRUCTIONS
N.E. IT 9300 (GB) 13-07-2000 12:47 Pagina 1

VISA IT-9300 Specifications

General

Brand	VISA
Model	IT-9300
Category	Remote Control
Type	Universal Remote
Power Source	2 x AAA Batteries
Operating Range	Up to 8 meters
Infrared Frequency	38kHz
Compatible Devices	DVD
Compatibility	Multiple brands and models

Summary

DESCRIPTION

Remote Control Button Descriptions

Detailed descriptions of each button and indicator on the remote control unit.

RAPID SET-UP

Immediate Remote Control Setup

Step-by-step instructions for quickly making the remote control functional for your TV.

Further Information

Recommendation to read the full instructions for optimal use of the remote control.

HOW TO PROGRAM THE REMOTE CONTROL FOR TVs

TV Manual Programming

Procedure for programming the remote using specific codes for TV brands.

TV Automatic Search and Programming

Method for automatic code searching if the TV brand code is unknown.

SECONDARY FUNCTIONS

Transmitting Secondary Commands

Instructions on how to access and use secondary functions via the SHIFT key.

DISPLAYING THE CURRENT CODE

LEARNING FUNCTION

Learning Procedure

Step-by-step guide for learning new commands from other remote controls.

Cancellation Procedures

Methods for cancelling learned commands or restoring pre-programmed codes.

WHAT TO DO IF...