ViSAGE 95908 - First use; Checking the body fat scale and package contents; Removing protective foils and cleaning

First use
11
− Do not step on the standing surface if you are wearing
shoes. This may damage the glass surface of the body
fat scale.
First use
Checking the body fat scale and package contents
NOTICE!
Risk of damage!
If you are not cautious when opening the packaging with a sharp
knife or other pointed object, you may quickly damage the body
fat scale.
− For this reason, be very careful when opening it.
1. Take the body fat scale out of the packaging.
2. Check to make sure that all parts are included (see Fig. A).
3. Check whether the body fat scale or individual parts are damaged. If this
is the case, do not use the body fat scale. Contact the manufacturer via the
service address indicated on the warranty card.
Removing the protective foils and cleaning the body
fat scale
Remove any leftover packaging from the body fat scale. Proceed as follows:
1. Pull the protective foil out of the battery compartment
6
by the tab to
activate the body fat scale.
2. Clean the body fat scale (see chapter “Cleaning and maintenance”).