EasyManuals Logo

Vishay BLH LCp-100 User Manual

Vishay BLH LCp-100
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
1-2
1.3 SPECIFICATIONS
Display
Communications
Type
high intensity cobalt green vacuum
fluorescent
two-wire, half duplex
Active Digits
7 digit alpha-numeric 0.59 high for weight,
8 digit alpha-numeric 0.39 high for stabs
9600
Environment
Approvals/Certifications
Operating Temp.
-10 to 55°C (15 to 131°F)
3611: (Mass I,II,III; Div.1,2; Groups A-G)
Storage Temp.
-20 to 85°C (-5 to 185°F) -
C22.2: (Class I,II, III; Div.1,2; Groups A-G)
Humidity
5 to 90% rh non-condensing
ESD susceptibility, category B
Voltage
117/230 Vac +/-15% @ 50/60Hz
radiated electromagnetic field, cat. A
Power
15 watts maximum
conducted line transients, cat B
Parameter Storage
flash EPROM
FCC part 15 subpart B, Class A Canadian
Dept. of Communication Class A
Enclosure
Grow 1, Class A
Dimensions
Standard
4.63 x8.40 x 6.5 in. HWD
Electrical Safety
NEMA Options
8.5 x 13.5 x 10.45 in. HWD
Susceptibility: subparts 801,2,3, and 4
Materials
Emissions: Equipment Class I, Group A
Aluminum
Case/Bezel
overlay meets 94V-O rating
1.4 WARRANTY POUCY
BLH warrants the products covered hereby to be
free from defects in material and workmanship.
BLH's liability under this guarantee shall be
limited to repairing or furnishing parts to replace,
f.o.b. point of manufacture, any parts which,
within three (3) years from date of shipment of
said product(s) from BLH's plant, fail because of
defective workmanship or material performed or
furnished by BLH. As a condition hereof, such
defects must be brought to BLH's attention for
verification when first discovered, and the
material or parts alleged to be defective shall be
returned to BLH if requested. BLH shall not be
liable for transportation or installation charges,
for expenses of Buyer for repairs or replace-
ments or for any damages from delay or loss of
use for other indirect or consequential damages
of any kind. BLH may use improved designs of
the parts to be replaced. This guarantee shall
not apply to any material which shall have been
repaired or altered outside of BLH's plant in any
way, so as in BLH's judgment, to affect its
strength, performance, or reliability, or to any
defect due in any part to misuse, negligence,
accident or any cause other than normal and
reasonable use, nor shall it apply beyond their
normal span of life to any materials whose
normal span of life is shorter than the applicable
period stated herein. In consideration of the
forgoing guarantees, all implied warranties are
waived by the Buyer, BLH does not guarantee
quality of material or parts specified or furnished
by Buyer, or by other parties designated by
buyer, if not manufactured by BLH. If any
modifications or repairs are made to this
equipment without prior factory approval, the
above warranty can become null and void.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Vishay BLH LCp-100 and is the answer not in the manual?

Vishay BLH LCp-100 Specifications

General IconGeneral
BrandVishay
ModelBLH LCp-100
CategoryMonitor
LanguageEnglish

Related product manuals