Vision Fitness T9200 SIMPLE User Manual

Date of last revision: 11.06
TROUBLESHOOTING
TREADMILL.TROUBLESHOOTING.2007.REV1
1
TROUBLESHOOTING FOR 2007 TREADMILLS:
(T9200 SIMPLE, T9500 SIMPLE, T9600 SIMPLE, T9250 SIMPLE, T9450 SIMPLE)
(T9200 DELUXE, T9500 DELUXE, T9600 DELUXE, T9250 DELUXE, T9450 DELUXE)
(T9200 PREMIER, T9500 PREMIER, T9600 PREMIER, T9250 PREMIER, T9450 PREMIER)
(T9700S, T9700HRT, T9800S, T9800HRT)
TROUBLESHOOTING

Vision Fitness T9200 SIMPLE Specifications

General

Brand	Vision Fitness
Model	T9200 SIMPLE
Category	Treadmill
Language	English

Summary

Data Cable Troubleshooting

Large Data Cable

Carries communication between lower and upper boards. Has 8 pins (wires).

Small Data Cable

Carries 11 volts power from lower to upper board. Has 6 pins (wires).

Defective Data Cable Symptoms

Symptoms indicating issues with large or small data cables.

Error Message Codes

E4: Incline Position Tolerance Error

Indicates incline position is outside the allowed tolerances.

E5: Elevation Stall Condition

Signifies an issue where the elevation function has stalled.

E6: Elevation Signal Loss

Indicates the signal from the elevation sensor is lost.

E7: Speed Time Out Error

A timeout error related to the speed sensor or function.

E9: Speed Sensor Signal Loss

Indicates the signal from the speed sensor is lost.

Maintenance Messages

No Belt Movement

Belt Movement Issues

Won't Go Over 0.5 MPH

Troubleshooting steps when the running belt cannot exceed 0.5 MPH.

Runaway Belt Problems

Circuit Breaker Tripping

Treadmill Belt Surges

Treadmill Stalls

No Power Issues

Drive Motor Stalls

Elevation Problems

Noise Problems

Deck and Belt Problems

Heart Rate Function Issues