What to do if the MCB or PCB on my Vision Fitness T9350 is not operating?
If your Vision Fitness Treadmill's MCB or PCB isn't working, begin by checking all connections, the power switch, the circuit breaker, and the fuse. Also, inspect fuse F1 to ensure it is in good condition.
What to do if the PCB powers up but the MCB will not operate on my Vision Fitness T9350 Treadmill?
If the PCB of your Vision Fitness Treadmill powers up, but the MCB doesn't operate, first, check that the line voltage is sufficient. If the voltage is adequate, the MCB may be damaged and should be returned to the manufacturer.
General| Running Surface | 20" x 60" |
|---|---|
| Speed Range | 0.5 - 12 mph |
| Incline Range | 0 - 15% |
| Folding | Yes |
| Weight | 265 lbs |
| Motor | 3.0 HP |
| Heart Rate Monitoring | Contact grips and wireless telemetry compatible |
General warnings, children, appliance safety, electrical safety, and power requirements.
Clothing, usage warnings, and cleaning procedures for safe operation.
How to correctly connect power and use the safety key for operation.
Units, time, weight, and service message configuration for T9450HRT.
Procedure for performing belt auto-calibration on T9450HRT.
Common issues and solutions for treadmill operation problems.
To Next Page
