Need help?Do you have a question about the Vision Fitness T9600 and is the answer not in the manual?
General| Running Area | 20" x 60" |
|---|---|
| Incline | 0-15% |
| Speed | 0.5 - 12 mph |
| Folding | Yes |
| Weight Capacity | 400 lbs |
| Weight | 265 lbs |
| Motor | 3.0 HP |
| Heart Rate Monitoring | Contact Grips and Polar Receiver |
| Display | LCD |
Locate and record the frame and console serial numbers for service and warranty.
Apply grease to bolt threads and partially tighten all bolts before final tightening.
Lists the 5mm L-shaped wrench, 8mm Allen wrench, and screwdriver included with the treadmill.
Details items in the parts box: water bottle, safety key, and color-coded hardware bags.
Contents: M8 x 20L Bolts (2), M8 x 55L Flathead Bolts (4).
Contents: M8 x 15L Bolts (4), M8 x 135L Bolts (4).
Contents: M4 x 12L Panhead Screws (4).
Attach left and right console supports using M8 x 55L bolts and M8 x 20L bolt.
Mount console to mast with M8 x 15L bolts and handlebars with M8 x 135L bolts.
Connect data cables and secure motor cover with M4 x 12L screws.
Configure treadmill model and units, then run auto-calibration for optimal performance.
Use 8mm Allen wrench to adjust tension bolts for belt slippage or centering.
To Next Page
