Visionix VX40 Instructions

Instructions for cleaning and sterilization
Lensmeter
VX40
This instruction guide aims to clean and sterilize your VX40 for common use .
For other instructions, please refer to the USER MANUAL.
For your comfort it’s recommended to clean the device regularly. Please clean the instrument following these
instructions. Cleaning conducted by a process other than the one described in this instruction may cause
deterioration or damage to the equipment.
1- Cleaning of frame or lenses
Cleaning of the frame or lens before analysis is important.
Clean the frame with idalkan wipes incl. alcohol. disinfectant or other alternative.
2- Cleaning of lens clamping
Cleaning of the lens clamping important.
Clean the frame with Cidalkan wipes incl. alcohol. disinfectant or other alternative.
Pay particular attention
During the lens clamping cleaning do not
clean do stongly you may damage this
part..

Visionix VX40 Specifications

General

Category	Medical Equipment
Measurements	Refraction, Keratometry
Printer	Built-in thermal printer
Power Supply	100-240V AC, 50/60Hz
Measurement Accuracy (Refraction)	±0.25D
Measurement Accuracy (Keratometry)	±0.05D
Pupil Diameter Range	2mm to
Measurement Time	Less than 1 second
Display	Color LCD
Connectivity	USB, RS-232