Need help?Do you have a question about the Visionix VX40 and is the answer not in the manual?
General| Category | Medical Equipment |
|---|---|
| Measurements | Refraction, Keratometry |
| Printer | Built-in thermal printer |
| Power Supply | 100-240V AC, 50/60Hz |
| Measurement Accuracy (Refraction) | ±0.25D |
| Measurement Accuracy (Keratometry) | ±0.05D |
| Pupil Diameter Range | 2mm to |
| Measurement Time | Less than 1 second |
| Display | Color LCD |
| Connectivity | USB, RS-232 |
Provides a summary of the VX40's capabilities and features.
Defines the manual's content and scope for proper use and maintenance.
Outlines general safety guidelines for operating the device.
Details precautions related to electrical connections and usage.
Provides instructions for safe transport, storage, and handling of the device.
Lists important precautions to follow during the use of the VX40.
Explains the meaning of various safety symbols used in the manual.
Lists all accessories and components included with the VX40.
Identifies and illustrates the main parts of the VX40 from different views.
Guides through the steps required for installing the VX40, including site requirements.
Explains the correct procedures for starting and shutting down the VX40.
Introduces the device operation and toolbar for accessing interfaces.
Details how to use the interface for measuring framed glasses.
Explains how the interface displays and measures pupillary distance.
Covers prism calculation and displays results in the interface.
Describes how to analyze lens properties at specific points.
Guides on measuring lenses without a frame.
Explains how to compare measurements of multiple lenses.
Details how to access the configuration settings via the Tools button.
Explains various user-configurable settings like rounding and language.
Covers advanced settings including data transfer, printer, and software upgrades.
Describes technical settings, including calibration and export options.
Step-by-step guide on how to measure a frame using the device.
Instructions for measuring a lens that is not in a frame.
Explains how to modify the cylinder convention settings.
Guides on changing the display type for lens measurements.
Details how to manually change the detected lens type.
Provides instructions for clearing measurement data.
Explains how to perform a detailed analysis of a lens.
Guides on printing measurement results and ticket samples.
Explains the process of connecting and sending data from the device.
Details how to export data records and screenshots to storage.
Instructions on saving and comparing multiple lens measurements.
Steps for downloading and installing software updates.
Procedures for resetting or refreshing the device system.
Instructions on how to properly pack the VX40 for storage or transport.
Lists common warning messages and their corresponding actions.
Explains how to enable remote diagnostics for technical support.
Provides guidance on what to do if the system stops or malfunctions.
Describes how to resolve issues when the frame holder nose is blocked.
Addresses issues with incorrect measurements on trial lenses.
Troubleshooting steps for general incorrect measurements.
General advice and precautions before performing maintenance.
Instructions for cleaning the device and optical components.
Step-by-step guide to replace the printer paper roll.
Instructions on how to replace the fuses in the device.
Guidance on replacing worn-out protective caps.
Lists the technical specifications of the VX40 device.
Outlines compliance with relevant directives and international standards.
Provides definitions for key terms used in the manual.
Lists contact details for different regions and technical support.
To Next Page
