Visionix VX40 - Usage Precautions for VX40; Understanding Safety Symbols

Safety
VX40 User Guide
10 / 53
2.4 Precautions during use
Important!
 Do not place or use the VX40 in direct sunlight.
 Do not expose the VX40 to excessive dust or humidity.
 Do not place the VX40 in a hot air current (e.g. above a heater).
 Do not obstruct the ventilation vents.
 Never place the VX40 close to the following types of equipment which can
interfere with the reception of commands from the remote control:
 halogen lamp (direct or indirect),
 flu compact lamp,
 equipment emitting infrared radiation (e.g. autophoroptor, automatic
tonometer, etc.).
 Keep the screen surface clean. Protect it from dust, fingerprints and shocks.
 When you switch off the VX40, wait at least 5 seconds before switching it on
again.
2.5 Symbols
Important: consult the documents supplied with the equipment
Alternating current
The equipment must be returned to the manufacturer for scrapping