Visionix VX40 - Prism Calcluation Results

Using the VX40
VX40 User Guide
21 / 53
Table 4-5: Prism Calculation Toolbar
Icon
Description
Change right P.D.
Change total P.D.
Change left P.D.
Select P.D. according
to minimum and
maximum constraints
Cancel
Delete
Reject changes
Accept changes
Cancel changes
Note:
You can only carry out prism calculations for single vision and bifocal lenses.
Prism Calcluation Results
The following interface displays the results of a prism calculation.
Figure 4-4: Prism Calculation Results