Visonic KF-234 PG2 - Datasheet Manual

KF-234 PG2 is a 4-button, two-way
wireless keyfob which arms and dis-
arms PowerMaster
®
residential alarm
systems. It can also be used for emer-
gency signaling, home automation
and other remote control applications,
providing instant visual verication
that the requested command has been
successfully executed.
KF-234 PG2
Two-way Wireless Keyfob
•
PowerG
®
two-way Frequency
Hopping Spread Spectrum FHSS-TDMA
technology - provides robustness and
reliability closer than ever to wired
•
Designed for arming and disarming
as well as for emergency signaling,
home automation and remote control
applications
•
Large transmission range enabling
repeater-free installations
•
Longer battery life (up to 8 years with
typical use)
•
Visible signal quality indication shown
on the device
•
Compatible with PowerMaster
®
systems and PowerG receivers
Specications:
Battery type:
3V, CR-2032 Lithium battery
Weight
(including battery):
25g (0.9oz.)
Operating
temperature:
0°C to 55°C
(32°F to 131°F).
Dimension:
60 x 34.5 x 12.5mm
(2.4 x 1.4 x 0.5in)
Certications:
, PowerG and PowerMaster are registered trademarks of Visonic Ltd. Other names are the property
of their owners. Visonic reserves the right to change information or specications without notice.