Visonic NEXT CAM PG2 - User Manual

D-302893 1
NEXT CAM PG2,
NEXT CAM-K9 PG2
Wireless, PowerG, PIR / Pet Immune Detectors with
Integrated Camera
Installation Instructions
1. INTRODUCTION
The Next CAM PG2 is a 2-way, microprocessor-controlled,
wireless digital PIR detector with integrated camera and
microphone for alarm verification. Activated upon PIR detection
or upon demand, the Next CAM PG2 sends clear images with
optional audio to the Monitoring Station. It thus enables accurate
status assessment of the premises.
The PIR detector's features are as follows:
• Up to 15 meters (49 ft).
• 90° angle camera overlaps PIR field of view
• 10 meter (33 ft) range in complete darkness overlaps PIR rangge
• Wall creep zone protection.
• For pet immune version - Target Specific Imaging™ (TSI)
technology is used for distinction between human beings and
pets weighing up to 38 kg (85lb).
• Includes a fully supervised PowerG transceiver.
• True Motion Recognition™ algorithm.
• No vertical adjustment is needed.
• Temperature compensation.
• Sealed chamber protects the optical system from insects.
• Front cover and back tamper, for improved tamper protection.
• White light protection.
The camera's features are as follows:
• Optional AC power
• Up to 10 cameras
• Optional audio with images for listen -in
• Images multiplexed from all cameras
• Color and back & white images
• Auto-setup (brightness, contrast)
• Camera tuning by simple walk-test
• Day and night CMOS camera, with IR illumination. This allows
taking pictures in full darkness without letting the intruder know.
• Instant capture: guarantees capture of fast moving intruder.
• Camera operation modes:
o Post alarm – pictures are taken after detection by
detector.
o On demand – pictures are taken after a command from
the monitoring station.
• An event records 2 images per second. 10-15 images total
(can be customized by request)
• Works with repeaters for extended range
A. Microphone
B. Camera lens
C. IR LED
D. Light sensor
E. LEDs
B
A
C
D
E
Fig. 1. External View
2. SPECIFICATIONS
GENERAL
Detector Type: Dual element low-noise pyroelectric sensor
Lens Data: No. of Curtain Beams / curtains:
Next CAM PG2: 18 far, 18 mid, 10 close.
Next CAM-K9 PG2: 18 far, 18 mid, 18 close.
Max. Coverage: 12 x 12 m, (40 x 40 ft) / 90°
Pet Immunity (Next CAM-K9 PG2 only): Up to 38 kg (85 lb).
ELECTRICAL
Internal Battery
: 6V Lithium battery (two CR-123A 3V batteries
or two CR17450 3V batteries, in series) or equivalent.
Note: For UL installations use Panasonic, Sanyo, GP or Varta
only. Use only the above battery. Dispose of used battery
according to the manufacturer's instructions.
Nominal Battery Capacity: 6V 1450 mA/h (2xCR123A), 2200
mA/h (2xCR17450)
Battery Life (for typical use): 4 to 5 years (CR123A) / 8 years
(CR17450).
Optional MAINS supply: Additional to batteries, 7.5 V DC.
Power Supply: Type C
FUNCTIONAL
True Motion Event Verification: 2 remote selections - 1 (OFF)
or 2 (ON) motion events
IR Illumination: 10 m (33 ft)
Picture Resolution: 320x240 pixels QVGA
Frame Rate: up to 2 fps (for user)
Alarm Period: 2 seconds
A. TOP VIEW
B. SIDE VIEW
C. Next CAM PG2: 0.5-
4m, Next CAM-K9
PG2: 2-4m
36 12 m0
10 20 30 40 ft
9
0
3 (10ft)
6 (20ft)
9 (30ft)
3 (10ft)
6 (20ft)
9 (30ft)
90°
36912 m0
2.4 m
(8 ft)
10 20 30 40 ft
B
A
C
Fig. 2. Coverage Pattern & Walk-test

Summary

Introduction to Next CAM PG2

Camera Operation Modes

Describes post-alarm and on-demand picture capture modes.

Next CAM PG2 Specifications

General Specifications

Details detector type, lens data, coverage, and pet immunity.

Electrical Specifications

Covers internal battery type, capacity, and optional mains supply.

Functional Specifications

Details true motion event verification and IR illumination range.

Device Enrollment Procedure

Next CAM PG2 Device Settings Configuration

Alarm LED Configuration

Configure the activation of the alarm LED indication.

LED ON;OFF Selection

Select between 'LED ON' and 'LED OFF' states.

Event Counter Setting

Determine alarm activation based on motion events or sensitivity.

DISARM Activity Configuration

Set the activity time during disarm mode.

AC Power Connection Reporting

Configure reporting for power failure and restoration.

Image Color Selection

Choose between black & white or color images.

Image Resolution Setting

Set pixel quality for images (160x120 or 320x240).

Image Brightness Adjustment

Adjust the brightness level of the captured images.

Image Contrast Adjustment

Adjust the contrast level of the captured images.

Microphone Settings

Determine whether to activate or disable the microphone.

Local Diagnostics Test Procedure

Installation Guidelines and Mounting

General Installation Guidance

Provides essential advice for proper detector placement and environmental considerations.

Mounting Instructions

Details recommended mounting height and options.

Special Comments and Warnings

Visonic NEXT CAM PG2 Specifications

General

Brand	Visonic
Model	NEXT CAM PG2
Category	Security Sensors
Language	English