Visonic POWERMASTER 10 - Page 37

MENUS AND FUNCTIONS
36 D-303223 PowerMaster-10 / PowerMaster-30 User's Guide
B. To Delete a Proximity Tag
1.
Enter the USER SETTINGS menu, select the [PROXIMITY TAG] option and
press the button to confirm.
1
2.
The display will read [ADD NEW TAG].
Click the button until the display reads [DELETE TAG].
3.
Press to confirm.
The display will read [T01:Tag (prox)] alternating with the ID number of the
tag.
2, 5
4.
or
Key in the tag number you wish to delete, for example, [0+6] or alternatively
click the or button until the display reads the tag number,
"T06:Tag (prox)" and "ID No. 300-2564".
When the tag you wish to delete appears on the display, press .
5.
The display now reads [<OFF> to delete].
6
6.
To delete the tag press the button.
☺ Go to step 3
A "Happy Tune" ☺ sounds and the display reads [ DELETE TAG ] and
returns to step 3.
8
Additional Information (section C.5)
1
For detailed instructions on how to select User Settings – refer to section B.1 and section B.2.
2
The display shows the 1
st
Tag (Tag No.1) of the 8 tags.
3
To abort enrollment press the button.
4
If the tag was previously enrolled in the system, the PowerMaster-10 / PowerMaster-30 display reads
" ALREADY ENROLLED " and then switches to the name of the tag alternating with its ID number.
5
If no proximity tag is enrolled in the system, the display reads "NO EXISTING DEV. ".
6
If you wish to abort the procedure, press the button.
7
You can now enroll another proximity tag. You can also select another option in the User Setting menu
(see section B.1 and section B.2), or quit programming (see section B.3).
8
You can now add or delete another proximity tag. You can also select another option in the User Setting
menu (see section B.1 and section B.2), or quit programming (see section B.3).
ADD NEW TAG
PROXIMITY TAG
DELETE TAG
<OFF> to delete
K06:Tag
(prox)
T01:Tag (prox)
DELETE TAG