Visonic POWERMASTER 10 - Managing Proximity Tags and Keyfobs

MENUS AND FUNCTIONS
D-303223 PowerMaster-10 / PowerMaster-30 User's Guide 35
C.5 Add / Delete Proximity Tags
Each of the 8 PowerMaster-10 / PowerMaster-30 users may be provided with a proximity tag that can be used
instead of the user codes to perform a variety of functions, for example, arming, disarming, reading the event
log, etc.
Whenever a user code is required you can simply present a valid proximity tag instead of entering the user
code. Each tag should be assigned with a serial No. 1-8 (PowerMaster-10) / 1-32 (PowerMaster-30) that
corresponds to the User Code No. 1-8 (PowerMaster-10) / 1-32 (PowerMaster-30) and enrolled into the system
correspondingly.
The partition
∗
authorization of the tags is identical to their corresponding user codes. For example, proximity tag
3 is assigned to user code 3.
♦ Here you can add (enroll) new proximity tags or delete tags as required.

Carefully read the section titled "Additional Information" according to the indicated references
1
etc – see
table at end of this section.
A. To Add (Enroll) a Proximity Tag
1.
Enter the USER SETTINGS menu, select the [PROXIMITY TAGS] option and
press the button to confirm.
1
2.
The display will read [ADD NEW TAG].
3
To begin the process of enrolling a new proximity tag press .
3.
Present the proximity tag to the control panel within the timeout period.
4.
☺ Go to step 5
If enrollment was successfully completed, a "Happy Tune" ☺ sounds and
the display reads [DEVICE ENROLLED] for a short duration and then changes
to read the tag's details.
4
5. The display shows the allocated tag serial No (user No.), which is always the
first free number, for example:
[T01:Tag (Prox)].
or
If you wish to assign the tag to another user, for example, "User No. 5", key
in [0+5] or alternatively click the or button until the display
reads [T05:Tag (Prox)] and then press to confirm.
☺ Return to step 2
The display reads [ DEVICE ENROLLED ] a "Happy Tune" ☺ sounds and the
display will then change to [ T01:Tag (Prox) ].
7
∗
Refers to PowerMaster-30 only
T05:Tag (Prox)
T01:Tag (Prox)
ENTR ID:xxx
-
xxxx
DEVICE ENROLLED
ENROLL NOW or
ADD NEW TAG
PROXIMITY TAGS