Visonic PowerMaster-30 G2 - 3.7 Connecting Power to the Control Panel

OPERATING THE POWERMASTER SYSTEM
14 D-307502 PowerMaster-10/30 G2 User's Guide
Chime ON/OFF
Disable / enable the chime zones (see Appendix C) by alternate clicking of the key, as shown below:
PRESS
RESULTING DISPLAY
CHIME ON
CHIME OFF

READY HH:MM
CHIME indicator lights steadily when “chime on” is selected.
Note: For UL Listed Product, the Chime setting must be set to “Chime ON”.
Adjusting the Speech Volume
1
and the Volume of the Keypad Beeps
The following diagrams show how to increase or decrease the loudness by clicking the <1> or<4> key
(assuming that the volume was at minimum/maximum to begin with).
PRESS
RESULTING DISPLAY
PRESS
RESULTING DISPLAY
VOLUME+
(max)
VOLUME–
VOLUME+
VOLUME–
VOLUME+
VOLUME–
(max)
VOLUME+
VOLUME–
1
Refers to PowerMaster-30 G2 with voice option only