Visonic POWERMAXEXPRESS

USER SETTINGS
D-303974 PowerMaxExpress User's Guide 23
Figure 8 - Users Settings Flow Chart
Notes:
(1) Functions inside black rectangles are accessible only if master user code was entered.
(2) For the year, enter the two last digits only.
(3) Press
OK
I
to display the number, state and name of first bypassed zone. Press repeatedly to view all the bypassed zones.
(4) To enter "A" (AM) press (or one of the 3 keys above it), to enter "P" (PM) press (or one of the 3 keys above it).
(5) SET/SHOW/RECALL BYPASS menus are accessible only if "manual bypass has been selected by the installer.
(6) This menu is not available when partition is enabled.
(7) At this stage, present the prox tag to the MKP-160 keyprox.
Figure 8 Detail "A" – Sheduler Function