EN
CARE AND MAINTENANCE
Cleaning Your Appliance
Upon installation of your new appliance, it is recommended that the unit be thoroughly cleaned.
Turn off the appliance and unplug the unit from the wall outlet.
Remove any contents.
Wash the inside with a damp warm cloth soaked in lukewarm water and baking soda solution.
The solution should be about 2 tablespoons of baking soda to 1 quart of water.
Keep the door gasket (seal) clean in order to keep the unit running efficiently.
The outside of the appliance should be cleaned with mild detergent and warm water.
Dry the interior and exterior with a soft cloth.
Vacation
Short vacations (< 3 weeks):
Appliance may be run under normal operating conditions during short vacations.
Long vacations (≥ 3 weeks):
Turn off the appliance and unplug the unit from the wall outlet.
Remove any contents.
Clean the appliance.
Leave the door open slightly to avoid condensation, mold and/or odors.
Moving Your Appliance
Turn off the appliance and unplug the unit from the wall outlet.
Remove any contents.
Securely tape down all loose items inside your appliance.
Tape the doors shut.
Energy Saving Tips
The appliance should be located in the coolest area of the room, away from heat producing
appliances or heating ducts and out of direct sunlight.
Ensure the door is securely closed when the appliance is turned on.
To Next Page
Loading...
Need help?
General