EasyManua.ls Logo

Vissani HVBC58STF - Appliance Operation; Temperature Settings; Display and Lighting Controls

Vissani HVBC58STF
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
The temperature range of the wine and beverage
cooler is for 37-61 (3-16) . +/- 5.
The display indicates the average temperature
of the appliance at the moment.
When the appliance is switched on, or the pad is pressed, the appliance runs on the temperature setting of
45 (7).
The temperature of the wine and beverage cooler can be set anywhere between 37
-61 (3-16) by pressing
temperature up and temperature downpads as follows:
¨
¨
Normal Temperature Setting
¨
Manual Temperature Setting
¨
Operation
Press the [SET] pad until you hear a “Beep” sound (approximately 2 seconds).
Pr
▲▼
ess the pads to increase or decrease the desired temperature in increments of one degree.
Press the [SET] pad to confirm your desired temperature setting. If no pad is pressed within 10 seconds, your
selected temperature setting will be automatically confirmed.
¨
¨
¨
NOTE:
To select temperature display between Celsius () or Fahrenheit (
), press the pad for approximately 2 seconds.
The indicator (under the snow mark) will remains on when compressor working, and will turns off when in neutral.
To switch t
he interior light ON/O F F ,press the .pad

Related product manuals