VisualSonics Vevo 3100 - Compatible Disinfectants for Ultrasound System

PN 51340 User Guide: Cleaning and Disinfecting Guide for the Vevo 3100
imaging system and MX series transducers Rev 1.0
Page 3 of 6
4. Mix the disinfectant solution compatible with the system, following disinfectant label
instructions for solution strengths and disinfectant contact duration. See "Compatible
disinfectants for the ultrasound system" below.
5. Wipe surfaces with the disinfectant solution.
6. Air dry or towel dry with a clean cloth.
Compatible disinfectants for the ultrasound system
The exterior surface of the ultrasound system can disinfected using any of the following chemically
compatible disinfectants approved at the research site.
Table 1 Compatible disinfectants for the ultrasound system
Disinfectant
Active Ingredient
Airkem A-33
Quaternary Ammonia
Anios Wipes
Quaternary Ammonium, Isopropyl Alcohol
Aniosyme DD1 (5%)
Quaternary Ammonium
Anioxide 1000
Peracetic Acid, Peroxide
Asepti-HB
Quaternary Ammonium
Asepti Steryl
Orthophenylphenol, Para-tertiary Amylphenol, Ethanol
Asepti-Wipe II
Quaternary Ammonium
Cidalkan Lingettes
Ethanol
Clinell Universal Sanitizing
Wipes
Quaternary Ammonium, Benzalkonium Chloride, Propane-1,2-diol
Dynacide PA
Ispopropanol
Endosporine
Glutaraldehyde
Hydrogen Peroxide (3%)
Hydrogen Peroxide
Indicin Plus (1%)
Glucoprotamin
Mikrobac Forte 2%
Benzylalkyldimethyammoniumchlorides,N-N-Dodecyclpropane-1,3-
diamine
Sanocloth HB
Quaternary Ammonium
Steranios 2%
Glutaraldehyde
Steranios 20%
Glutaraldehyde
Trigene Advance Wipes
Quaternary Ammonium, Plymeric Biguanide Hydrochloride
Wex-Cide
Ortho-Phenylphenol, Ortho-Benzyl-para-Chlorphenol