Tools Y ou Will Need
General In form at ion
•
Rea d Instructions through carefully before beginning assembly.
• When assembling components, place on a non-abrasive surface
(i.e. shipping box) to avoid scratching.
• We recommend an area approx 10’x 8' (3 m x 2.4 m) for unobstructed assembling.
• You should not need to use excessive force when assembling components.
A S S EMB LY I N S T R U C TI ON S
1
(Not to scale)
15
V2.8/090623
24 in
32 in
10.3 in
58.5 in
82
52.25 in
(133 cm)
80.5 in
(204 cm)
80 in
(203 cm)
88 in
(224 cm)
86.5 in
(220 cm)
107.75 in
(274 cm)
Please read through before startin g as sembly.
IMP ORTANT: CHECK THE IN SIDE OF YOUR POSTS FO R AL L MATERIALS .
Chec k Box for These Contents
(Mon. to Fri. 8:00 AM to 5:00 PM EST).In the event of missing or defective parts please call our customer service dept. at
11
10
9
8
2
4
14
1
7
6
3
12
13
5
16
- 10838
- 10792
- 10821
1. Rafters (8)
Length 38"
2. Pergola End Caps (20)
- 10700-1
3. Post Caps (4)
- 10824
4. Right Posts (2)
Length 84"
5. Left Posts (2)
Length 84"
6. Post T rims (4)
- 10737-1
7. Carrying Beams (4)
Length 46 1/2"
- 10839
8.
Side Panel T op-Rails
(2)
Length 31 5/8“ (80 cm)
- 10822
9. Side Panel V ertical Spindles
Length 10 3/8”
-
10795
10. Side Panel Middle Rails (2)
Length 31 5/8“ (80 cm) - 10823
- 10793
11. Side Panel Square Lattices (2)
Length 47 3/4”
12. Aluminum Stiffener Inserts (2)
- 10996
13. Carrying Beam Coupler (2)
- 10707-1
14. Side Panel Horizontal Bottom Rails (2)
Length 31 5/8" (80 cm)
- 10794
15.
3 in. (76 m.)
Stainless Steel Screws
(32)
- 20007
16.
1 1/2 in. (38 mm.) Stainless Steel Screws (12)
- 20005
17.
T ube of V inyl Glue (2) - 20000
18.
#8 x 2 1/2" (6.3 cm.) Stainless Steel Screws (for wood posts) (8) - 20009-1
www.wearevita.com
• Hammer - Tape Measure - Level - Stool or Short Ladder - Shovel
• Cordless Drill (1/8" x 2")- 3 mm x 51mm Steel Drill Bit
Additional Materials Required
• 4" x 4" x 4' (244 cm) Long Wood Posts (4) (Only for Option 1)
• Concrete Ready Mix
* Purchase separately from your local lumber store
18