Need help?Do you have a question about the vita KEYHOLE GARDEN and is the answer not in the manual?
General| Brand | vita |
|---|---|
| Model | KEYHOLE GARDEN |
| Category | Lawn and Garden Equipment |
| Language | English |
Read all instructions thoroughly before commencing assembly to ensure proper installation.
Place components on a non-abrasive surface, such as the original shipping box, to prevent scratches.
Ensure an unobstructed assembly area of approximately 4' x 8' for comfortable building.
Components should fit together without the need for excessive force during assembly.
Insert one side panel between the posts as shown in the diagram.
Insert an H-Support followed by another long board between the posts as illustrated.
Repeat Step 1A for the other sides and H-Supports to build up the structure.
Place the post caps onto the top of the vertical posts as depicted.
Insert basket corner brackets into each end of the basket panels, ensuring they face the same way.
Connect the four basket panels together to form the inner basket structure.
Position the assembled inner basket in the center of the garden bed, resting it on the ground.
Fill the garden bed with soil, noting the approximate volume required (0.76 m³ or 27 cu ft).
Layer carbon and nitrogen materials, water, and compost starter to make your own soil.
To Next Page
