vita Huron Planter With Trellis - User Manual

1. Post Caps (4) - 10810
2. Trellis Top and Bottom Rails (2) - 11089
3. Trellis Left Post (1) - 11090
4. Trellis Horizontal Slats (4) - 11091
5. Trellis Vertical Slats (5) - 11092
6. Trellis Right Post (1) - 11093
7. Pre-Assembled Side Panels (2) - 11094
8. Pre-Assembled Front & Back Wall Panels with Posts Connected (2) - 11097
9. Planter Box Post Trims (4) - 10730-1
10. Floor - Left (1) - 11098
11. Floor - Middle (1) - 11099
12. Floor - Right (1) - 11100
13. Floor Supports (2) - 11101
14. 5/8” (1.6 cm) Self-Augering Stainless Steel Screws (12) - 20016
Tools You Will Need
• Cordless Drill
General Information
• Read Instructions through carefully before beginning assembly.
• When assembling components, place on a non-abrasive surface
(i.e. shipping box) to avoid scratching.
•
We recommend an area approx 4’x 8’ for (1.2 m x 2.4 m) unobstructed
assembling.
• You should not need to use excessive force when assembling
components.
Huron Planter With Trellis
Please read through before starting assembly.
Check Box for These Contents
In the event of missing or defective parts please call our customer service dept. at 1 800 282 9346 (Mon. to Fri. 8:00 AM to 5:00 PM EST).
ASSEMBLY INSTRUCTIONS
1
Ver2.2 10272020
15.88 in
40.3 cm
36 in
91 cm
33 in
84 cm
13.88 in
35 cm
11.83 in
30 cm
15 in
38 cm
48 in
122 cm
32.125 in
81.6 cm
2
1
3
4
5
7
8
12 1310 11
6
914
Not to scale
www.wearevita.com

Summary

Step One: Assemble the Planter Box

Assemble Planter Box Components

Instructions for assembling the planter box using pre-assembled side panels, front/back panels, and floor supports.

Step Two: Insert Floor Panels

Insert Floor Panels and Post Trims

Connect tongue-and-groove boards and insert post trims into the assembled planter box.

Step Three: Assemble the Trellis

Assemble Trellis Structure

Assemble the trellis by inserting vertical and horizontal slats into rails and attaching posts with screws.

Step Four: Final Assembly

Final Assembly and Post Caps

Attach the trellis assembly to the planter box and install the post caps for the final setup.

Overview

1. Function Description
2. Important Technical Specifications
3. Usage Features
4. Maintenance Features

The Vita Huron Planter with Trellis is a decorative and functional outdoor garden accessory designed to enhance any garden, patio, or deck space. This product combines a planter box for cultivating plants with an integrated trellis for supporting climbing vines or creating a visual screen.

Function Description:

The primary function of the Huron Planter with Trellis is to provide a dedicated space for planting and growing various types of flora. The planter box offers a contained environment for soil and plants, making it ideal for areas where in-ground planting is not feasible or desired, such as on paved surfaces or balconies. The integrated trellis serves as a support structure for climbing plants like roses, clematis, ivy, or cucumbers, encouraging vertical growth and maximizing planting space. It can also be used to create a privacy screen or add a decorative architectural element to an outdoor setting. The design allows for easy assembly and a sturdy construction, ensuring durability in outdoor conditions. The planter box is designed with floor panels to contain soil and provide proper drainage, while the post trims allow for optional securing to a surface for added stability.

Important Technical Specifications:

• Overall Dimensions (Assembled):
  • Height: 48 inches (122 cm)
  • Width: 32.125 inches (81.6 cm)
  • Depth: 15.88 inches (40.3 cm)
• Planter Box Dimensions:
  • Height: 13.88 inches (35 cm)
  • Width: 33 inches (84 cm)
  • Depth: 15 inches (38 cm)
  • Internal Depth (approximate, based on floor panel placement): 11.83 inches (30 cm)
• Components: The product consists of several pre-assembled and individual parts, including:
  • Post Caps (4) - Part #10810
  • Trellis Top and Bottom Rails (2) - Part #11089
  • Trellis Left Post (1) - Part #11090
  • Trellis Horizontal Slats (4) - Part #11091
  • Trellis Vertical Slats (5) - Part #11092
  • Trellis Right Post (1) - Part #11093
  • Pre-Assembled Side Panels (2) - Part #11094
  • Pre-Assembled Front & Back Wall Panels with Posts Connected (2) - Part #11097
  • Planter Box Post Trims (4) - Part #10730-1
  • Floor - Left (1) - Part #11098
  • Floor - Middle (1) - Part #11099
  • Floor - Right (1) - Part #11100
  • Floor Supports (2) - Part #11101
  • Self-Augering Stainless Steel Screws (12) - Part #20016 (5/8" or 1.6 cm)
• Material: The components appear to be made of a durable, weather-resistant material suitable for outdoor use, likely vinyl or a composite, given the "Vita" brand's typical product offerings. The screws are stainless steel for corrosion resistance.
• Assembly Tools Required: Cordless Drill.
• Assembly Area Recommendation: Approximately 4 ft x 8 ft (1.2 m x 2.4 m) unobstructed space.

Usage Features:

• Versatile Planting: The planter box is suitable for a wide range of plants, from annuals and perennials to herbs and small shrubs.
• Vertical Gardening: The integrated trellis supports climbing plants, allowing for vertical gardening, which is beneficial for small spaces or for creating visual interest.
• Decorative Element: The classic design with slatted trellis and framed planter box adds an aesthetic appeal to any outdoor area.
• Privacy Screen: When covered with dense climbing foliage, the trellis can serve as an effective privacy screen.
• Easy Assembly: The product is designed for straightforward assembly with pre-assembled panels and clear, step-by-step instructions. Components are designed to lock into place where applicable, simplifying the process.
• Optional Surface Securing: The planter box post trims have pre-drilled holes, allowing the planter to be secured to a surface (screws for this purpose are sold separately) for enhanced stability, especially in windy conditions or high-traffic areas.
• Durable Construction: Made with materials and fasteners designed to withstand outdoor elements, ensuring longevity.
• Modular Floor Panels: The floor of the planter box is constructed from three tongue-and-groove panels that fit onto support rails, providing a sturdy base for soil and plants.

Maintenance Features:

• Low Maintenance Material: The material (likely vinyl or composite) is generally low maintenance, requiring only occasional cleaning with soap and water to remove dirt or grime. It typically does not require painting, staining, or sealing.
• Corrosion-Resistant Hardware: The use of stainless steel screws ensures resistance to rust and corrosion, contributing to the product's overall durability and reducing the need for hardware replacement.
• Easy Cleaning: The smooth surfaces and open design of the trellis facilitate easy cleaning.
• Replacement Parts Availability: In the event of missing or defective parts, customer service is available, suggesting the possibility of obtaining replacement components, which extends the product's lifespan.

The Huron Planter with Trellis offers a practical and attractive solution for gardeners looking to add a functional and decorative element to their outdoor living spaces, with an emphasis on ease of assembly and long-term durability.

vita Huron Planter With Trellis Specifications

General

Brand	vita
Model	Huron Planter With Trellis
Category	Outdoor Furnishing
Language	English