1.
Center Post
(1) 2” x 3 1/2“ x 75” - 11105
2. Pergola Posts (2) 2“ x 3 1/2” x 64“ - 11106
3. Post Cap (1) - 10611
4. Top and Bottom Rails
(4) 1 1/2” x 3 1/2“ x 54 7/8” - 11111
5. Rail Inserts
(2) 1 1/4“ x 1 1/4” x 20 1/2“ - 11108
6.
Horizontal Spindles
(10) 1 1/2” X 1 1/2“ X 54 3/4” - 11112
7.
Vertical Spindles
(8) 7/8” X 1 1/2“ X 58 1/4” - 11110
8. 2“ x 3 1/2” Flat top Caps (4) - 10615
9. 1 1/2
” Self-Auguring Stainless Steel Screw
(18) - 20005
10.
3” Self-Auguring Stainless Steel Screw
(26) - 20007
11.
Tube of Vinyl Glue
(1) - 20000
Tools You Will Need
• Cordless Drill
• Level
Optional Materials
• See note on page 6
• Pressure treated wood 2x4x?” (To be modified)
• “L” Bracket (If securing center post to concrete)
• Wood screws for securing modified 2x4
General Information
• Read Instructions through carefully before beginning assembly.
• When assembling components, place on a non-abrasive surface (i.e. shipping box) to avoid scratching.
• We recommend an area approx 5’x 8’ for unobstructed assembling.
• You should not need to use excessive force when assembling component.
10’ Pergola Trellis
ASSEMBLY INSTRUCTIONS
1
Not to Scale
10
9
Please read through before starting assembly.
IMPORTANT: CHECK TH
E INSIDE OF YOUR POSTS FOR ALL MATERIALS.
Check Box for These Contents
In the event of missing or defective parts please call our customer service dept. at
1 800 282 9346
(Mon. to Fri. 8:00 AM to 5:00 PM EST).
V1
.1/201020
The 10’ Pergola Trellis is designed to be installed with our
10’ x 10’ Pergola with an opening of 110” between the posts.
1
2
3
45 6 7
8
11
Ground
10 in
110 in
73 in
9 in
75 7/8 in
7 7/8 in
www.wearevita.com
To Next Page
Need help?
General
