EasyManua.ls Logo

VitalConnect VitalPatch Quick Start Guide

VitalConnect VitalPatch
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1
MKT-161 Rev. E (February 2021)
QuickStart Guide
for VistaPhone
This guide describes how to use the VitalPatch
®
biosensor
and VistaPhone for at-home cardiac monitoring.
• The VitalPatchis worn on the chest to measure and
record your vital signs and heart rhythms.
• The VistaPhonesends data from VitalPatch to your care
team for monitoring.
Wear the VitalPatch at all times during the monitoring period
and keep the VistaPhone near you.
For detailed instructions and warnings, refer to IFU-06,
VitalPatch Instructions for Use and IFU-26,VistaPoint
Instructions for Use. You can view these by tapping the
Menu button on the VistaPhone and then tapping Help.
Customer Support
1-800-219-3000
VitalPatch VistaPhone Care Team
Unpacking and Charging VistaPhone
If you have not already done so, remove the VistaPhone
charger and cable from the package labeled “VistaPhone.”
Keep all packing materials.
Use only the provided USB-C cable and charger for your
VistaPhone. Keep the device plugged into the charger at
night while you are sleeping. You can use the VistaPhone
while it is charging. Look at the battery indicator in the status
bar. Do not let the VistaPhone battery run out.
Turning the VistaPhone On and Off
The VistaPhone should always be ON when you are wearing
a VitalPatch. The screen will go to sleep (but device will
remain ON) after a period of inactivity.
• ToTurnON:Press Power Key until the device vibrates
and the screen lights up. To check if ON, tap the screen.
• ToUnlock:Swipe across the screen with your nger and
then enter PIN code 1234.
• ToTurnOFF: Press and hold the Power Key until the
Options menu displays, and then select Power O.
Checking Cloud Connection
Keep the VistaPhone in a place with a strong cell phone
signal. If the screen shows
 CloudConnectionLost , move the
VistaPhone to a location with a better signal.
Section 1: Using the VistaPhone
CALL911ifyouarehavinganemergency!
Menu
Power Key
Report Symptom
VitalPatch
Status
Cloud
Connection
Status
Insert charge
cable here
Home Key
Volume
Up/Down
VistaPhone Battery
Indicator
Section 2: Applying the VitalPatch
To see an instructional video, tap the Menu button, tap
Help, and then tap VitalPatchApplication.
1. Prepare Upper-Left Chest
a. If a previous VitalPatch is still applied, remove it rst.See
Section7onpage4.
b. If there is body hair on the site, shave the site before
cleaning. Prepare an area larger than the VitalPatch. See
gure to the right.
c. Clean site with an alcohol wipe and allow to dry.
Prepare
upper-left chest
in this location
LEFT
Side

Other manuals for VitalConnect VitalPatch

Question and Answer IconNeed help?

Do you have a question about the VitalConnect VitalPatch and is the answer not in the manual?

VitalConnect VitalPatch Specifications

General IconGeneral
Device TypeWearable biosensor patch
CategoryMedical Equipment
ConnectivityBluetooth Low Energy (BLE)
Water ResistanceIP67
FDA ClearedYes
CE MarkedYes
SensorsECG, accelerometer
Data CollectedHeart rate, respiratory rate, skin temperature, activity, posture
Data StorageOn-body storage and cloud storage
Intended UseRemote patient monitoring, clinical trials, and general health monitoring
FunctionsContinuous monitoring, data transmission