Need help?Do you have a question about the Vitamix PROFESSIONAL SERIES 500 and is the answer not in the manual?
General| Bowl capacity | 2 L |
|---|---|
| Pulse function | Yes |
| Built-in display | No |
| Number of speeds | 10 |
| Speed control type | Step |
| Number of pre-programmed settings | 3 |
| Power source | AC |
| AC input voltage | 220 - 240 V |
| Type | Tabletop blender |
| Cord length | 1.8 m |
| Product color | Brushed steel |
| Country of origin | United States |
| Number of knife wings | 4 |
| Blade material | Stainless steel |
Weight and Dimensions| Depth | 222 mm |
|---|---|
| Width | 185 mm |
| Height | 520 mm |
| Weight | 4950 g |
Welcome message and initial setup instructions for the Vitamix blender.
Record model and serial numbers; contact details for customer service in Japan.
Covers injury avoidance, electrical hazards, fire risks, and proper operating procedures.
Identifies On/Off switch, Start/Stop, Variable Speed Dial, and Pulse switch.
Describes the container, 2-part lid, lid plug, tamper, and their locking/removal.
Explains automatic motor overload protection and power cord storage.
Instructions for placing the Vitamix on a level surface and connecting to a grounded outlet.
Details the On/Off switch, indicator light, and Start/Stop switch functions.
Explains the Pulse switch, Variable Speed Dial, and program selection.
Distinguishes between wet and dry blade containers and their intended uses.
Guide to identifying the correct tamper for specific Vitamix containers.
Provides instructions and warnings for using the tamper safely during blending.
Tips for using variable speeds for various recipes and avoiding motor overheating.
Information on the duration and automatic stopping of pre-set programs.
Step-by-step guide for loading, blending, and handling ingredients with the wet blade.
Instructions for using the dry blade container for grinding and dough kneading.
Steps for normal cleaning and sanitizing the blender container.
Instructions for cleaning the lid, lid plug, and tamper.
Guidance on safely cleaning the motor base exterior and controls.
How to reset the motor if it shuts off due to overheating.
Action to take if the retainer nut becomes loose, compromising blade assembly.
Information on registering the product and details of what the warranty covers.
Details what is not covered by the warranty and conditions that will void it.
Steps required to obtain service or repair under warranty.
To Next Page
