Need help?Do you have a question about the Vitamix PORTION BLENDING SYSTEM and is the answer not in the manual?
Essential safety instructions for operating the appliance, covering electrical, operational, and handling precautions.
Instructions for placing the unit on a surface, adjusting feet, and assembling key components like the ice chute.
Guidance on correctly positioning the ice shelf within the ice bin for proper operation.
Steps for connecting and routing the drain hose to ensure proper drainage without kinks.
Details on using the drain hose kit components to prevent kinking and ensure efficient drainage.
Procedure for initial cleaning and sanitizing of the ice bin before first use.
Instructions on how to properly fill the ice bin with ice, including what type of ice to use.
Instructions for assembling and disassembling the two-piece lid for the blender container.
Details the functions and operation of the various buttons and display elements on the control panel.
Explains how to access and use the owner controls for mode messages, temperature, and program settings.
Guide on using the pre-set buttons for various drink recipes and operation steps.
Instructions for using the PBS blender for general blending tasks without dispensing ice.
Step-by-step guide to reprogramming pre-set buttons using the machine's control panel.
Instructions for using an optional programming chip to customize pre-set buttons.
Procedure to revert pre-set programming to the original factory default settings.
Detailed steps for removing and installing the retainer nut on the container blade assembly.
Instructions for rotating or replacing the shaver blade, emphasizing safety precautions.
Procedure for safely removing ice from the ice bin, including a warning about unplugging.
Instructions for cleaning the exterior surfaces of the shaver base, avoiding immersion in water.
Guidance on gently cleaning the control panel and display window with a soft cloth.
Steps for cleaning, rinsing, and sanitizing the blender container using water and soap/sanitizer.
How to remove, wash, rinse, and dry the ice chute and splash guard components.
Detailed procedure for cleaning, rinsing, sanitizing, and drying the ice bin.
Instructions for cleaning under and around the container pad, ensuring proper reattachment.
Addresses common operational issues and provides step-by-step solutions for fixing them.
Details the limited one-year warranty and procedures for warranty claims and service.
Contact information for Vita-Mix service hot line and email for technical assistance.
To Next Page
General