To Next PageTo Next Page
Need help?Do you have a question about the Vitavia Venus 3800 and is the answer not in the manual?
General| Category | Greenhouse Kit |
|---|---|
| Manufacturer | Vitavia |
| Model | Venus 3800 |
| Depth | 1.95m |
| Frame Material | Aluminium |
| Glazing Material | Polycarbonate |
| Ventilation | 1 Roof Vent |
| Area | 3.8m² |
| Eaves Height | 1.24m |
| Glazing Thickness | 4mm |
| Base Type | Optional Steel Base |
Read instructions carefully, handle with care, use for intended purpose, and anchor the greenhouse.
Choose a sunny location, check parts, gather tools, and note nut tightening torque.
Ensure the base is square and level; options for steel base or concrete foundation.
Regular washing with mild detergent and cleaning door tracks for debris.
Lay out and loosely connect all side element parts on the floor.
Lay out and loosely connect all parts for the plain gable end.
Connect door gable end parts, aligning the door runner bar.
Join side elements to end elements, attach braces, and assemble the ridge bar.
Assemble the door components and slide it into the runner bar.
Install roof vent components, glass, and securing clips.
Fit glazing seals and glass panes, securing them with retaining clips.
Optional silicone sealing and placement of the warning label.
Close doors/vents in high winds; clear snow from roof during heavy snowfall.
Advice on insurance, model label, and keeping instructions for future reference.
