Need help?Do you have a question about the Vitavia Venus 6200 and is the answer not in the manual?
General| Frame Material | Aluminium |
|---|---|
| Door Type | Sliding Door |
| Number of Roof Vents | 2 |
| Base Included | No |
| Number of Windows | 0 |
| Number of Doors | 1 |
| Glazing Material | Horticultural Glass |
Choose a sunny, sheltered location for your greenhouse for optimal growth and protection.
Required tools include screwdrivers and a 10mm spanner or wrench for assembly.
Regularly wash the greenhouse with detergent and clean door tracks to prevent debris buildup.
Ensure the base is square and level; consider a steel base for windy locations.
Lay out parts and loosely connect side elements, adding extra bolts for cross braces.
Connect plain gable end parts loosely, adding extra bolts to vertical bars.
Connect door gable end parts loosely, attaching the door runner bar to the horizontal bar.
Bolt side elements to end elements, assemble ridge bar, and connect roof glazing bars and braces.
Assemble the door by connecting rollers, bars, and seals, then slide into the runner bar.
Connect roof vent side and top bars, slide glass into tracks, and position the window in the ridge bar.
Position glass on the roof, starting from the ridge, and secure with spring clips and retaining clips.
Seal edges with silicon if desired and place the warning label inside the house.
Close doors/vents in high winds; clear snow from the roof or provide support.
Advise including the greenhouse in house insurance and checking local building rules.
To Next Page