Vitek VT-2054 GY - User Manual

Need help?

Do you have a question about the Vitek VT-2054 GY and is the answer not in the manual?

Overview

Function Description
Important Technical Specifications
Usage Features
Maintenance Features

This document describes the VT-2054 GY ceramic fan heater, a device designed for heating small to medium-sized rooms.

Function Description

The VT-2054 GY is a ceramic fan heater equipped with various functions to provide comfortable and safe heating. It features a control panel on the unit and a remote control for convenient operation.

Key functions include:

Power On/Off: The device can be switched on and off using dedicated buttons on both the control panel and the remote control.
Power Level Selection: Users can choose between two power levels: 1400 W for small rooms and 2000 W for larger rooms.
Body Oscillation: The fan heater can oscillate to distribute warm air more evenly across the room.
Timer Setting: A switch-off timer can be set from 0.5 to 7.5 hours in 0.5-hour increments, allowing for automatic shutdown.
Room Heating Temperature Setting: The desired room temperature can be set within a range of 18 to 45 degrees Celsius, with 1-degree increments. The device will automatically switch off the heating element once the set temperature is reached and resume operation if the temperature drops.
Automatic Emergency Switch-Off: This safety feature activates if the unit overheats, automatically turning off the fan heater to prevent damage.
Protection from Dropping: If the fan heater is accidentally dropped, a blocking device will activate, switching off the unit. It must be returned to a vertical position and restarted.

Important Technical Specifications

Supply Voltage: 220-240 V ~ 50 Hz
Power Consumption: 1400/2000 W (corresponding to low and high power levels)
Service Life: 3 years

Usage Features

Before First Use:

If the unit has been transported or stored at low temperatures, allow it to stand at room temperature for at least three hours before use.
Unpack the fan heater and remove all packaging materials.
Check the unit for any damage. Do not use it if damaged.
Ensure that the operating voltage matches the mains voltage.

Operating the Fan Heater:

Placement: Place the fan heater on a flat, dry, and steady surface, ensuring the front and rear grids are not blocked and there is at least 0.9 m clearance from flammable materials, curtains, or furniture.
Remote Control: Install CR2025 batteries in the remote control, ensuring correct polarity.
Control Panel (Display 3): The display shows current temperature, selected power level, timer settings, and oscillation status. Digital indications (14) show temperature and timer values.
Power On/Off (Button 9 or 23): Press this button to turn the unit on or off. When turning off, a sound signal will be heard, and a flashing symbol (15) will appear, indicating a 30-second countdown before complete shutdown.
Power Level Selection (Button 10 or 24): Press to cycle through fan-only mode, low power (1400 W), and high power (2000 W).
Body Oscillation (Button 11 or 25): Press to activate or deactivate the oscillation mode.
Timer Setting (Button 12 or 26): Press repeatedly to set the switch-off timer from 0.5 to 7.5 hours. To check the current timer setting, press once. To switch off the timer, cycle until "0.0" appears.
Room Temperature Setting (Button 13 or 22): Press repeatedly to set the desired room temperature between 18 and 45 degrees Celsius. The unit will automatically regulate heating to maintain this temperature. To check the current temperature setting, press once.

Safety Precautions:

Do not touch hot surfaces or allow hot air to come into contact with exposed body parts to avoid burns.
Do not use the unit in bathrooms or rooms with high humidity.
Do not immerse the unit in water or other liquids.
Do not allow children to play with the unit.
Do not use the unit if the power cord or plug is damaged.
Do not overload the electrical outlet by connecting other high-power appliances.
Always unplug the unit before cleaning or if it is not being used.
Do not use the fan heater outdoors.
Do not use the fan heater in a limited space, for example, in built-in cabinets or wall niches.
If the unit overheats, unplug it immediately and allow it to cool for 20-30 minutes before restarting. Ensure grids are clear of obstructions. If it still doesn't work, contact an authorized service center.
If the unit is dropped, it will switch off. Return it to a vertical position and restart it.

Maintenance Features

Cleaning and Care:

Before Cleaning: Always switch off the fan heater (button 9 or 23), wait for the heating element to cool down, and then unplug the unit after 30 seconds.
Cleaning Agents: Do not use liquid detergents, solvents, or abrasive cleaners on the fan heater body.
Water Contact: To prevent fire or electric shock, ensure no water or other liquid enters the fan heater body.
Unit Body: Clean the unit body with a slightly damp cloth and then wipe it dry.
Grids: Use a vacuum cleaner with an appropriate attachment to clean dust from the front (1) and rear (6) grids.

Storage:

After cleaning, store the fan heater in a dry, cool place, away from children.
Before subsequent use, check the unit's operability, the integrity of the power cord insulation, and the power cord plug.

Disposal: