Vitek VT-3502 User Manual

3
LIST OF CONTROLS
1. Sleep button
2. Hour set button
3. Minute set button
4. Alarm set button
5. Time set button
6. Power switch
7. Band switch
8. Volume control
9. Tuning control
10. Snooze button
11. LED display
12. Dial pointer
13. Battery compartment
14. FM antenna
15. AC power cord
1. CONNECTING THE POWER
Insert correctly wired plug into a power outlet the clock
display will blink showing that the time is not correct. It
will also blink if there has been a power cut and no back
up battery is fitted.
2. TO SET THE TIME
2.1. Press and hold the time set button.
2.2. Press the minute set button or hour set button
to set the clock display to the correct time.
2.3. Release the time set button.
3. TO PLAY THE RADIO
3.1. Slide the power switch to the "on" position.
3.2. Set the band switch to the desired wave band.
ENGLISH
14
3502-2.qxd 22.08.03 12:20 Page 2

Vitek VT-3502 Specifications

General

Brand	Vitek
Model	VT-3502
Category	Clock Radio
Language	English

Summary

CONTROLS AND INITIAL SETUP

List of Controls

Lists all user-operable buttons, switches, and display elements.

Connecting the Power

Instructions for plugging the device into a power outlet.

Setting the Time

Process to initiate, adjust, and confirm the clock time.

Playing the Radio

Power on the radio and select the desired band.

SLEEP AND ALARM FUNCTIONS

Sleep Timer

Configure and activate the automatic radio shut-off timer.

Wake to Radio Alarm

Set up the radio to wake you at a specific time.

Wake to Buzzer Alarm

Set up the buzzer to wake you at a specific time.

SNOOZE OPERATION

Using the Snooze Button

Press snooze button for temporary alarm silence.

ADVANCED MODES AND MAINTENANCE

Sleep and Wake Programming

Program automatic sleep and wake-up functions.

Battery Backup and Care

System for power failure and cleaning instructions.

SPECIFICATIONS

Technical Specifications

Details frequency range, impedance, power, and battery.