5
FOCUS (2) knob until the image is
sharp on the ceiling or wall.
Note: The time must be projected on a
wall or ceiling in a darkened room. The
maximum projection distance is 1 – 3
meters.
1. Press and hold the ALARM SET/OFF
(5) button.
2. Press the MINUTE SET(10) or HOUR
SET (9) button, holding them until the
desired alarm time appears on the
LCD.
1. Set the alarm time as instructed above.
Select a radio station and adjust the
volume.
2. Set the ON/OFF/AUTO (1) function
selector to the ‘AUTO’ position. When
the current time matches the alarm
time, the radio receiver will automati-
cally turn on for 1 hour and 59 minutes;
after which it will turn off. The projector
will not turn on with the alarm.
Notes:
- To turn off the alarm signal, press the
ALARM SET/OFF (5) button again and
the selected alarm time will carry over
till the next day. To turn off the alarm
completely (so that it won’t repeat the
next day) – set the ON/OFF/AUTO (1)
selector to the OFF position.
- The radio receiver can be temporar-
ily turned off manually by pressing the
SNOOZE (4) button; after 9 minutes
the radio will turn on again.
1. Set the alarm time as instructed above.
Set the VOLUME/BUZZER (11) knob
to the BUZZER position; you will here
a click – that means the buzzer is ac-
tive.
2. Set the ON/OFF/AUTO (1) function se-
lector to ‘AUTO’. When the current time
matches the alarm time, the buzzer will
turn on and for 1 hour and 59 minutes;
after which it will turn off.
1. Press the ALARM SET/OFF (5) button
to turn off the buzzer and the alarm
settings will carry over to the next day.
To turn off the alarm completely (so
that it won’t carry over to the next day),
set the ON/OFF/AUTO (1) function se-
lector to OFF.
1. The buzzer can be temporarily turned
off manually by pressing the SNOOZE
(4) button; after 9 minutes the buzzer
will automatically turn on again.
1. Set the ON/OFF/AUTO (1) function se-
lector to ‘OFF’ or ‘AUTO’.
2. Press the Sleep Set (7) and Minute Set
(10) button simultaneously. The display
will show the timer setting decreasing
from 59 minutes to zero. Release both
button when the timer reaches the de-
sired setting.
. The radio receiver will now operate
until the sleep timer reaches zero; you
can turn it off manually by pressing the
Snooze/Sleep Off (4) button.
An internal antenna is used to receive AM
radio stations. Rotate the radio receiver
To Next Page
