Vitek VT-3512 - User Manual

3
CONTROL LOCATIONS
1. LED DISPLAY
2. SNOOZE BUTTON
3. SLEEP BUTTON
4. HOUR BUTTON
5. AC POWER CORD OUTLET
6. MINUTE ADJUST BUTTON
7. TIME SET BUTTON
8. ALARM SET/OFF BUTTON
9. POWER INDICATOR
10. MODE SWITCH
11. BAND SELECTOR
12. FM ANTENNA WIRE
13. VOLUME (ON/OFF) / BUZZER CONTROL
14. TUNING CONTROL
15. DIMMER HI/LO CONTROL
16. LED ALARM ON INDICATOR
17. SPEAKER
18. BATTERY COMPARTMENT
HELPFUL OPERATING GUIDE
This Electronic ClockRadio should be operated on AC
household current and with 9V battery backup.
BATTERY BACKUP
1. Install a good quality 9Volt battery in the compartment
at the back cabinet of this radio.
2. In the event of a power failure, the radio and time display
will stop operating, but this battery will keep the clock
and alarm time going. This means that although you will
not be able to see the time, the batteryoperated clock
will continue operating.
3. When the power failure is over, the TIME DISPLAY (1) will
ENGLISH
14
3512 -2.qxd 08.07.03 18:13 Page 2

Summary

CONTROL LOCATIONS

LED DISPLAY

Indicates the current status of the device, often showing time or mode.

SNOOZE BUTTON

Temporarily silences an alarm, allowing for a short period of extra sleep.

SLEEP BUTTON

Allows the user to set a timer for the radio to automatically turn off.

HOUR BUTTON

Used for setting the hour component of time or alarms.

AC POWER CORD OUTLET

Port for connecting the device to mains electricity for power.

MINUTE ADJUST BUTTON

Used for setting the minute component of time or alarms.

TIME SET BUTTON

Initiates the process of setting the current time on the device.

ALARM SET;OFF BUTTON

Controls the setting and disabling of the alarm function.

POWER INDICATOR

Visual cue indicating whether the device is powered on.

MODE SWITCH

Selects between different operating modes, such as radio or alarm.

BAND SELECTOR

Allows switching between different radio frequency bands (e.g., FM1, FM2).

FM ANTENNA WIRE

The flexible wire used to receive FM radio signals.

VOLUME (ON;OFF); BUZZER CONTROL

Adjusts audio volume or switches to a buzzer sound for alarms.

TUNING CONTROL

Used to select specific radio stations by adjusting frequency.

DIMMER HI;LO CONTROL

Adjusts the brightness level of the display.

LED ALARM ON INDICATOR

An LED that lights up to show the alarm has been activated.

SPEAKER

The component that produces sound output from the radio or alarm.

BATTERY COMPARTMENT

Location where the backup battery is inserted.

HELPFUL OPERATING GUIDE

BATTERY BACK-UP

Details on how the 9-Volt battery maintains clock and alarm functions during power outages.

TO PLAY RADIO

Radio Operation Steps

Instructions for turning on the radio, selecting bands, tuning stations, and adjusting volume.

TO SET THE CORRECT TIME

Time Setting Procedure

Step-by-step guide for accurately setting the current time using the buttons.

TO SET THE WAKE-UP ALARM TIME

Setting the Alarm Time

Procedure for setting the desired time for the alarm to activate.

SLEEP TO MUSIC

Sleep Timer Function

How to set the radio to automatically turn off after a specified period.

WAKE TO MUSIC OR BUZZER

Dual Wake-up Modes

Instructions for waking up to radio or a buzzer sound automatically.

SNOOZE BUTTON FUNCTION

Snooze Operation

How to use the snooze button for temporary alarm silencing.

TO SLEEP AND WAKE TO MUSIC

Automatic Sleep & Wake

Setting the device to play music, turn off, and then wake you at a set time.

DIMMER CONTROL

Display Brightness Adjustment

How to adjust the display's brightness using the dimmer switch.

CAUTION

Safety Precautions

Important warnings regarding water, batteries, ventilation, and open flames.

SPECIFICATIONS

Technical Specifications

Details on power supply, tuning range, and loudspeaker.

SERVICE LIFE OF THE CLOCK RADIO

Expected Lifespan

Information on the minimum expected service life of the product.

Vitek VT-3512 Specifications

General

Brand	Vitek
Model	VT-3512
Category	Clock Radio
Language	English