20
◆ Assist in Implementation
Press the DOWN button for a long time, and the electric vehicle enters the electric
assistance pushing state. Electric vehicles run at a constant speed of 6 km/h. At the
same time, the screen shows.
Release the DOWN button and the electric vehicle will immediately stop power output
and return to the state before the push.
■ The boosting function can only be used when the user pushes the electric vehicle,
and should not be used in the riding state.
◆ Turn the Backlight On/Off
Press the headlight key briefly to dim the backlight of the instrument and notify the
controller to turn on the headlight at the same time. When the external light is
insufficient or driving at night, the headlights of the whole vehicle can be turned on.
Press the headlight key again, the instrument backlight turns on and the controller is
notified to turn off the headlight.
◆ Boost Gear Selection
Press the UP/DOWN button briefly to switch the assist gear of the electric vehicle, thus
changing the output power of the motor. The default output power range of the
instrument is 0-5 gears, 0 gears are 0 power output, 1 gears are the lowest power,
To Next Page
Loading...
