Vitilan i7 Pro User Manual

36 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image





Table of Contents

Questions and Answers:

C
Carolyn MillerJul 29, 2025
How to fix Vitilan i7 Pro Scooter if it won't turn on?
- M
  Martin MorrowJul 29, 2025
  If your Vitilan Scooter won't turn on, here are a few things to check: * **Battery:** Ensure the battery is switched on. If it is, the battery may be out of power and needs a full charge. If the battery is old or damaged, consider replacing it. * **Connections:** Check the display line to ensure it is properly connected. Reconnect if necessary. * **Components:** The controller or switch may have failed. In this case, replacing the controller or the switch is recommended.
S
Shawna RodriguezAug 3, 2025
Why is the mileage of my Vitilan i7 Pro inadequate after fully charged?
- L
  levi66Aug 4, 2025
  If your Vitilan e-Bike’s mileage is noticeably reduced after a full charge, several factors could be responsible: * **Tire Pressure:** Inadequate tire pressure can significantly impact mileage. Inflate your tires to the recommended pressure. * **Charger Issues:** A malfunctioning charger might prevent a full charge. Repair the charger. * **Battery and Controller:** The battery might not be fully charging due to a controller issue. Examine and repair the controller. Also, the battery could be aging or damaged, requiring replacement. * **Other tips:** You may need to re-adjust the e-Bike, boost the e-Bike by manpower or warm the battery above 0? (32?).
S
Steven MitchellAug 10, 2025
What to do if I can't adjust the speed on my Vitilan i7 Pro?
- A
  Annette MayAug 10, 2025
  If you're having trouble adjusting the speed on your Vitilan Scooter, it could be due to a few reasons: * **Low Battery Voltage:** A low battery voltage can affect speed control. Ensure the battery is fully charged. * **Throttle Damage:** The throttle governing bar might be damaged and need replacement. * **Spring:** Replace the spring.
M
Melissa NelsonAug 16, 2025
Why does the wheel hub on my Vitilan Scooter stop running after switching on the power?
- E
  ewelchAug 17, 2025
  If the wheel hub on your Vitilan Scooter stops running after you switch on the power, here’s what you can check: * **Battery Connection:** A loose battery connection can cause this issue. Re-connect the battery. * **Control Line:** Poor contact in the controlling line may be the problem. Replace the connection line. * **Wheel Hub Connection:** If the wheel hub connection is loose or damaged, replace the battery’s protective board with a new one.

Vitilan i7 Pro Specifications

General

Brand	Vitilan
Model	i7 Pro
Category	Scooter
Language	English

Summary

Safety and Compliance

Operating Your New E-bike

Turning On and Basic Operation

Methods for turning on the e-bike, using throttle, and adjusting power levels.

Pedal-Assisted Mode

Explanation of how pedal assist works, including triggering, stopping, and gear shifting.

Advanced Operating Features

Cruise Control and Throttle

Safe Battery Charging Practices

Safety precautions and guidelines for charging the e-bike battery, including charger use and placement.

LCD Display (UKS2) Overview

Production Name, Model, and Specs

Identifies the product as UKS2 LCD display and lists its technical specifications.

LCD Display Production Introduction

Display Features Summary

Detailed introduction to display features like speed, battery, backlight, gears, mileage, and fault codes.

LCD Display Instructions

Full Display Layout and Indicators

Detailed explanation of all icons and indicators on the LCD full display.

Speed, Power, and Other Indicators

Explanation of speed modes, power indicators, and other indicator meanings like lights, brake, and gear.

LCD Display Function Descriptions

Power On/Off and Auto Shutdown

Instructions for turning the display on/off and details about the automatic shutdown feature.

PAS Gear Selection Method

How to choose between different pedal-assist (PAS) gear levels using the buttons.

LCD Display Mode Switching

Mileage Display Mode Cycling

Speed Display Mode Switching

LCD Display Advanced Functions

Speed Display Options

Headlight and Backlight Control

LCD Display Parameter Setting

Entering and Exiting Settings

Password Input for Advanced Settings

LCD Display Setting Adjustments

Backlight, Shutdown, and Units

Manual/Automatic Switching

LCD Display Advanced Parameter Tuning

Voltage and Gear Selection

Speed and Current Limiting

LCD Display Wheel and Magnet Settings

Wheel Diameter and Speed Limit

Magnet Count Settings

LCD Display Throttle and PAS Settings

Error Codes and Installation

Error Code Definitions (UKS1)

Explanation of error codes displayed on the UKS1 LCD screen and how to interpret them.

Instrument Installation Guide

Care and Maintenance

General E-bike Care

Specific Usage Guidelines

Special Battery and Charger Care

Battery Charging and Charger Use

Battery Handling and Safety

Battery and Charger Safety Warnings

Water Exposure Warnings

Warnings about keeping the battery away from water and avoiding submersion to prevent damage.

Cable, Plug, and Pedal Safety

Safety advice regarding cables, plugs, sockets, and pedals during operation and charging.

Safety Precautions Summary

Battery Safety Guidelines

Comprehensive safety rules for handling the battery, including fire, overheating, and disassembly warnings.

Battery Charger Safety Rules

Safety guidelines for the battery charger, covering disassembly, shocks, water, and short-circuiting.

Critical Safety Warnings

Water and Electrical Safety

Critical warnings about water exposure to batteries, plugs, and potential electrical hazards.

Charger and Component Safety

Warnings related to charger usage, pedal rotation during charging, and using damaged components.

Trouble Shooting Guide

Common E-bike Failures and Solutions

A table detailing common e-bike failure phenomena, their causes, and recommended solutions.

Related product manuals