11
(1) Shutter: Digitally control amount of light, the amount is
smaller the image is darker and the frame rate is also
slower.
(2) AGC (Auto Gain Control): auto control the brightness based
on setting when light is not enough.
(3) SENS-UP：Only available when item (2) AGC value is larger
than 0, use to increase Senor to light’s sensibility.
(4) Brightness Adjust image brightness.
(5) D-WDR: Digital-wide dynamic range. Digitally adjusting
exposure in areas of the frame to maintain optimum detail
in both the shadows and highlights of the image.
(6) DEFOG：De-Fog. When observing under strong light or
special environment, use Defog function to see clear image.
Below fig for De-Fog setting.
(6-1) POS/SIZE：Adjust de-fog position and area.
To Next Page
Loading...
