12
(6-2) GRADATION：To set gradation levels near the edge of
defog area.
(6-3) DEFAULT：Return to default setting.
(6-4) RETURN: Return to last page.
1.4.2 BACKLIGHT
Press left/right button to choose turn on/off Backlight mode.
(1) OFF：Disable backlight function.
(2) WDR：Wide Dynamic Range. WDR allows an imaging system
to correct for the intense back light surrounding a subject
and thus enhances the ability to distinguish features and
shapes on the subject. See below for setting WDR.
(2-1) GAIN: Set WDR gain level to raise up brightness of
darker image.
(2-2) WDR OFFSET：Wide Dynamic Range OFFSET.
(2-3) RETURN: Return to last page.
To Next Page
Loading...
