Why is water not flowing from the nozzle of my VITRA Toilet or flowing weakly?
If water isn't flowing from the nozzle or is flowing weakly, check the following: * Ensure the water pressure in your area is adequate. * Inspect the nozzle tip for any obstructions. * Verify that the water supply valve is fully open. * Check that the water supply hose isn't bent. * Check the water-supply valve or hose for any obstructions.
What to do if the remote control of my VITRA Toilet doesn't work or the LED lights don't turn on?
If the remote control isn't working or the LED lights are off, make sure: * The batteries have enough power. * The batteries are correctly inserted with the right polarity. * Nothing is blocking the transmitter or receiver of the remote control.
What to do if my VITRA Toilet is leaking water?
If you notice a water leak, check if there is a leak in the connection between the water supply pipe and the main unit. Also, inspect the water supply hose for leaks, bends, or damage.
What to do if the washing functions of my VITRA Toilet aren't working, but the STOP/POWER button's LED is ON?
If the STOP/POWER button's LED is on but the washing functions aren't working, ensure that: * You are sitting on the seat, as the washing functions activate only when someone is seated. * You are seated properly and not leaning too much to one side. * The remote control batteries have enough power. * The transmitting area of the remote control isn't blocked. * The receiving area of the main unit isn't blocked.
How to fix low water or seat temperature on my VITRA Toilet?
If the water temperature is too low, ensure the temperature adjustments are turned on. For a low seat temperature, check that the unit is turned on.
General| Material | Ceramic |
|---|---|
| Bidet Function | Yes |
| Heated Seat | Yes |
| Soft Close Seat | Yes |
| Weight Capacity | 150 kg |
To Next Page
