VITRA V-Care - Page 9

9
Does it work when nobody is
sitting on the toilet?
Except the seating open/close mechanism, no
other functions will work unless someone is
seated on the WC.
During installation, in order to test the nozzle
movement, you can activate the nozzle by
pressing the stop/power + cleaning/moving
button on the left side of the WC (when
facing the WC) and holding for 3 seconds.
If I use one of the V-care
models, don’t I still need to use
toilet paper afterwards to dry off?
It is recommended to use toilet paper before
using dryer for complete cleaning and shorter
drying times.
How much time should it take
to ‘dry’ using the V-care dryer?
An average person needs to 30 sec up to 60
sec. By pressing the dryer button once, the
dryer operates up to 180 sec, this time should
be more than sufcient to complete the
drying function.
Is there warm air for drying?
There is warm air for drying for Comfort
version. In the table below, you can nd the
temperatures for different levels.
Can V-care work without
electricity?
You can use the WC without electricity
and ush; however the nozzle and all other
additional functions will only operate when
electricity is present.
Seat temperature level Standard
5
th
level ΔT+35°C±3°C
4
th
level ΔT+30°C±3°C
3
rd
level ΔT+25°C±3°C
2
nd
level ΔT+20°C±3°C
1
st
level ΔT+25°C±3°C
Off Off