25ENG
Ice maker with insucient
production
the door closes hermetically
the ice maker is not near heat sources
the ice maker is suciently ventilated
the condenser is not clogged with dust
the fan turns freely
The ice maker does not make
ice
the refrigerating system is operating correctly
there is water in the grid assembly
the ice-level sensor is in the position indicated
the internal temperature in the cell is approximately ≤ -15°C
the ice level sensor is in the position indicated
if there is water in the ice cube tray, check the functionality of the refrigerant
system
there is no cube stuck in the ice cube tray
The ice maker does not
dispense ice
there is ice in the ice cube tray.
If there is, reset the system by switching it o for ~4/5 hours.
To Next Page
Loading...
