VIV Rigid Float/H Series - Connect; Input; Output; GND

4. Connect
(1) Input
The polar character is as shown below.
(2) Output
You can use any RCA cable for output from Rigid Float. For better sound quality, shorter
cable is desirable. Be careful that stiff cable may move your Rigid Float.
Each output (i.e. R+, R-, L+, L-) is insulated from GND. So the output signal can be
balanced-transferred.
(3) GND
GND connecting may result significant improvement of sound. Try to connect GND
regardless of hum.
5. Tracking Force
Rotate the counter weight for the appropriate tracking force. Use a tracking force gauge.
Often the recommended tracking force is not the best because of various conditions. We
strongly recommend to try to find the best tracking force frequently.
The counter weight is divided to 2 parts. You can fix the weight by tightening each weight.
Now the installation has completed!
Confirm that the traceable area covers the music area of the disk.
Please enjoy music exploration.
Specification
Model!! Rigid Float 7/H! Rigid Float 9/H! Rigid Float 13/H
!!(RFE-02H)! (RFS-02H)! (RFL-02H)
Pivot to stylus" about 7”~8”" about 9”~10”" about 13”~14”
Inner wire! Silk jacketed 4N Silver
Input!! Universal type (needs head shell)
Output!! RCA (balanced)
Under-hang! 3-15mm recommended
Offset"" 0°
Cartridge weight! up to 50g (including head shell)
Hight adjust! 20mm
Weight!! about 2 kg
R+(R)
R-(G)
L+(W)
L-(B)