Model: A1313361VB Page 8
IMPORTANT: Do NOT Return Dispenser To Store.
If you have a question or problem, please contact 855-VIVA-111 for assistance.
ASSEMBLY
Keep plastic bags away from children.
1. Remove dispenser from packaging.
2. Unpack drip tray and insert into dispenser.
As shown in figure
3. Remove the bottle receptacle from packaging
and insert into Stainless cold tank
As shown in figure
4. Properly dispose all of packaging.
5. Find a location for your water cooler that is protected
from direct sunlight and other sources of heat. Like
all other water coolers, prolonged exposure to
sunlight will discolor the plastic exterior
6. Place the cooler on
a flat, level surface
7. To ensure the cooler is level, adjust its feet by
rotating them, adjusting 4 feet first and slightly
adjust 5th feet last. As show in figure
8. Make sure the back of your water cooler is at
least 4 inches away from the wall. Keep a
minimum distance of at least 4 inches on each
side of your water cooler free. Keep items such
as papers, clothing, and furniture at a safe
distance. As show in figure
9. This cooler is designed and built for indoor use only.
Room temperature should not exceed 37C/99F.
4 feet 5
To Next Page
Loading...
