Need help?Do you have a question about the Vivax Metrotech vCam-6 and is the answer not in the manual?
General| Category | Analytical Instruments |
|---|---|
| Model | vCam-6 |
| Manufacturer | Vivax Metrotech |
| Display | LCD |
| Display Size | 8 inch |
| Light Source | LED |
| Battery Type | Lithium-ion |
| Battery Life | 6 hours |
| Camera Type | Color |
| Camera Head Diameter | 22 mm |
| Cable Length | 30 m |
| Recording Format | MPEG4 |
| Storage | SD Card |
| Operating Temperature | -10°C to 50°C |
| Storage Temperature | -20°C to 60°C |
| Power Source | Battery |
Safety measures for personnel operating in sewer environments.
Safety protocols and regulations for equipment usage at job sites.
Guidelines for safe operation and maintenance of the equipment.
Proper handling and disposal of batteries and environmental considerations.
Basic setup procedures for the control module.
Guide to navigating the control module's setup menu interface.
Procedure to select and set the control module's display language.
How to select the default drive for saving videos and pictures.
Configuration for imperial or metric units for the distance counter.
Setting the date, time, and preferred date format for the module.
How to select the desired sonde frequencies for operation.
Selecting the correct reel type for accurate pushrod deployment calculation.
Resets all control module settings to their factory defaults.
Instructions for updating the control module's software.
Step-by-step guide to initiating and performing video recordings.
Instructions for capturing still images in JPEG format.
How to view recorded videos and captured pictures on the module.
Managing files by copying, moving, or deleting them.
Solutions for issues encountered when playing video files.
Adding audio commentary to recordings using the internal or external microphone.
Adding descriptive text and comments to recorded videos and pictures.
Capturing still images from live video or recordings.
Safe procedures for deploying the pushrod cable into pipes.
Step-by-step guide for removing camera heads from D34/D46 series.
Instructions for installing cable and termination spring onto standard reels.
Final steps for installing D34 and D46 series camera heads.
Procedure for swapping camera heads on MX Mini Reels.
How to connect a utility locator transmitter to send a signal.
Steps to diagnose and resolve power-on issues.
Troubleshooting steps for missing picture with no status bar.
Diagnosing black screen issues with a grey status bar.
Troubleshooting continuous reboots due to settings change messages.
To Next Page
