Need help?Do you have a question about the Vivax Metrotech VM-850 and is the answer not in the manual?
General| Brand | Vivax Metrotech |
|---|---|
| Model | VM-850 |
| Category | Security Sensors |
| Language | English |
Covers battery types, safe handling, and environmental considerations.
Identifies and explains the various controls and displays on the receiver unit.
Identifies and explains the controls and displays on the transmitter unit.
Preferred method for applying a signal directly to a conductor for tracing.
Method for inducing a signal onto a conductor using a signal clamp.
Method using the transmitter's internal antenna to induce a signal.
General instructions and steps for operating the receiver unit.
How to measure the depth and signal current of a buried conductor.
Using a second clamp to identify specific conductors among multiple lines.
Introduction to using the Sonde mode for locating non-metallic pipes.
Techniques for locating a Sonde using signal patterns and indicators.
Using directional indicators to guide the search for a Sonde.
How to calibrate the receiver and check its performance against factory specs.
Step-by-step guide for replacing the batteries in the receiver unit.
Instructions for replacing the batteries in the VM-810 transmitter.
To Next Page
