Need help?Do you have a question about the Vivax ACP-12CH35AEF and is the answer not in the manual?
Essential safety rules to prevent accidents and ensure user protection.
Critical warnings regarding electrical safety, grounding, and installation practices.
Guidelines for safe operation and handling to prevent hazards.
Details model names and their corresponding cooling/heating capacities.
Explains the various operational features and controls of the indoor unit.
Describes the design and functional aspects of the outdoor unit.
Provides detailed diagrams and measurements for indoor unit installation.
Provides detailed diagrams and measurements for outdoor unit installation.
Illustrates the electrical connections and component layout for indoor units.
Specifies torque values for fittings and cable cross-sectional areas.
Outlines limits for pipe length and elevation differences for proper installation.
Procedure for removing air and moisture from the refrigerant system.
Steps for refrigerant recovery during re-installation.
Steps for re-purging air after re-installation.
Instructions for balancing refrigerant between indoor and outdoor units.
Method for creating a vacuum in the refrigerant system.
Steps for charging the system with the correct amount of refrigerant.
Definitions of technical terms and sensor readings used in the manual.
Explanation of icons displayed on the indoor unit.
Details on built-in protection mechanisms like current and zero crossing detection.
Explains the conditions for PTC heater activation and deactivation.
Describes how to set and control the indoor fan speed.
Rules governing compressor and fan operation during cooling.
Details protection against low evaporator coil temperatures.
Rules governing compressor and fan operation during heating.
Explains how the unit prevents cold air blow during heating.
Conditions and procedures for entering and exiting defrosting mode.
Describes the automatic mode selection and drying functions.
Explains forced operation, timer settings, and sleep mode behavior.
Details auto-restart and optional ionizer functions.
Maps operation lamp and timer lamp states to specific failures.
Step-by-step guide to diagnose indoor fan speed control problems.
Troubleshooting steps for temperature sensor and EEPROM errors.
Essential safety rules to prevent accidents and ensure user protection.
Critical warnings regarding electrical safety, grounding, and installation practices.
Guidelines for safe operation and handling to prevent hazards.
Details model names and their corresponding cooling/heating capacities.
Explains the various operational features and controls of the indoor unit.
Describes the design and functional aspects of the outdoor unit.
Provides detailed diagrams and measurements for indoor unit installation.
Provides detailed diagrams and measurements for outdoor unit installation.
Illustrates the electrical connections and component layout for indoor units.
Specifies torque values for fittings and cable cross-sectional areas.
Outlines limits for pipe length and elevation differences for proper installation.
Procedure for removing air and moisture from the refrigerant system.
Steps for refrigerant recovery during re-installation.
Steps for re-purging air after re-installation.
Instructions for balancing refrigerant between indoor and outdoor units.
Method for creating a vacuum in the refrigerant system.
Steps for charging the system with the correct amount of refrigerant.
Definitions of technical terms and sensor readings used in the manual.
Explanation of icons displayed on the indoor unit.
Details on built-in protection mechanisms like current and zero crossing detection.
Explains the conditions for PTC heater activation and deactivation.
Describes how to set and control the indoor fan speed.
Rules governing compressor and fan operation during cooling.
Details protection against low evaporator coil temperatures.
Rules governing compressor and fan operation during heating.
Explains how the unit prevents cold air blow during heating.
Conditions and procedures for entering and exiting defrosting mode.
Describes the automatic mode selection and drying functions.
Explains forced operation, timer settings, and sleep mode behavior.
Details auto-restart and optional ionizer functions.
Maps operation lamp and timer lamp states to specific failures.
Step-by-step guide to diagnose indoor fan speed control problems.
Troubleshooting steps for temperature sensor and EEPROM errors.
General| Type | Split System |
|---|---|
| Cooling Capacity | 12000 BTU/h |
| Energy Efficiency Class | A |
| Refrigerant | R410A |
| Power Supply | 220-240V, 50Hz |
| Energy Efficiency Ratio (EER) | 3.21 |
| Air Flow (High) | 550 m³/h |
| Operating Temperature (Cooling) | +18°C to +43°C |
| Operating Temperature (Heating) | -7°C to +24°C |
| Indoor Unit Weight | 8 kg |
To Next Page