Vivax FS-41T User Manual

VIVAX ENG
8
3. Setting of wind speed
Pressing button of wind speed can adjust the speed of wind.
SOLUTION TO SIMPLE FAILURE
When starting the fan, the fan blade doesn’t work:
Please check whether the power plug has really inserted into the
socket or the cover has distorted, which has touched the fan blade.
When starting the fan, loud noise appears:
Please check the unit as following:
1. Fan blade has been tight installed into the output shaft of motor.
2. Groove on back of cover has matched the inserting groove on the
output shaft.
3. There are tiny defective edge ring existing around the fan blade.
4. The cover has distorted, which has touched the fan blade.
INSTRUCTIONS FOR CLEANING
Should you need to clean the fan:
 Unplug the fan from the power outlet.
 Wipe it down with a damp cloth and a small amount of non-
abrasive cleaning agent.
 Never get the fan wet.
 Do not use the appliance it if it is wet.
 Clean the air inlet and outlet regularly. You may use a vacuum
cleaner for this.

Vivax FS-41T Specifications

General

Type	Household blade fan
Airflow	2412 m³/h
Placement	Floor
Noise level	55 dB
Control type	Buttons
Fan diameter	400 mm
Product color	White
Auto oscillating	Yes
Number of speeds	3
Height adjustment range	123 - 127 mm
Power source type	AC
Power consumption (typical)	50 W

Weight and Dimensions

Height	1230 mm